Activol® 9012 is a powdered inhibitor for use in pickling operations using sulfamic acid. It imparts maximum inhibiting properties to sulfamic acid solutions reacting on steel. Use at 1-2% of the sulfamic acid weight in pickling baths, for reducing metal loss, fume prevention and reduction of hydrogen embrittlement. This product is also used to clean boilers or other steam generation equipment where sulfamic acid is utilized. Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion. Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions. Activol® 1803 is the most efficient member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, high % efficiency (protection), excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces. Activol® 2105 is the latest development in hydrochloric acid inhibitor technology, surpassing the level of protection to the base steel afforded by its predecessor, Activol® 1803. Activol® 2105 contains all the performance characteristics of a good pickling inhibitor, such as fume suppression, free-rinsing, reduced chloride carry-over, as well as reduced acid consumption due to superior base metal protection. Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing. Hamico® EDM is a light colored, transparent, odorless oil for use as the dielectric fluid in EDM (electric discharge machining) operations. It is an extraordinarily pure lubricant with many performance benefits which make it a clear choice as a superior EDM fluid. These benefits include: exceptionally high dielectric strength and clarity, extremely low toxicity, low volatility, outstanding oxidative and thermal stability, low aromatic content, and excellent separation from water. Steelgard® 40-M-1 Base is an indoor rust preventive base for all ferrous surfaces including bearing steels, and tool steels. It is a barium free product. It can be used neat for maximum protection, but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles. Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F. Steelgard® 1938-K-1 is a solvent based rust preventive for steel, iron or non-ferrous metals protection under normal indoor storage conditions. It provides 6 to 12 months protection in a normal warehouse storage environment. Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness. Steelgard® 8920-K is an indoor rust preventive for steel stored in an acidic atmosphere such as a pickling department. It is designed primarily for protection against hydrochloric (muriatic) acid vapors. It deposits an oily film and is a very low odor product. It protects against staining and contact corrosion in tightly wrapped steel coils. Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. It is a ready to use product straight from the container and dries to a dry, transparent film that will not re-emulsify when exposed to moisture in the air. Steelgard® 9060 will provide excellent protection to metals under indoor or covered outdoor conditions. This product is particularly helpful where the need to reduce VOC emission levels is critical. | 
