Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be used in many applications where light lubrication is needed, e.g., forming, bending, stamping, straightening. It can be used on all metals as received, by pumping, dip, spray or wipe. Hamikut® 1937-A is a medium-duty, soluble oil containing extreme pressure additives used for machining and grinding ferrous and non-ferrous metals, including zinc. It provides extremely good emulsion stability and is highly tolerant to other contaminants typically carried into emulsions from prior operations. Kleerkut® 4900 Performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. Kleerkut® 4900 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming , easy to clean using filtration or centrifuge, and long lasting.
Kleerkut® 4900 has two "sister" products: Kleerkut® 4900-LT and Kleerkut® 4900 HD. For more information on these products, please inquire at: info@HarryMillerCorp.com. Hamidraw® 497-B is composed of extreme pressure resisting chlorinated base and synthetic esters. It contains no pigments, is non-flammable and is completely removable in mineral or chlorinated solvents. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 497-MX-2 is composed of extreme pressure resisting chlorinated base and synthetic esters. Pigmented and non-flammable, this product is completely removable in mineral solvents, chlorinated solvents and hot alkaline cleaners. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 1846-B is a heavy duty pigmented drawing lubricant for ferrous or stainless steels. It is utilized for extremely severe draws such as tube reducing, bar drawing, wire drawing when reductions up to 40% are required. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamidraw® 1846-NC is a heavy duty non-chlorinated pigmented drawing lubricant for ferrous or stainless steels. It can be used for severe draws such as tube reducing, bar drawing, wire drawing, etc. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamikut® 9036-B is an enhanced heavy duty soluble oil lubricant for heavy duty machining of ferrous and non-ferrous metals, including zinc. Provides corrosion protection, is low foaming, possesses excellent emulsion stability and produces good micro-finishes. It provides improved biological control capability for longer sump life in re-circulating systems. Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion. Hamilube® 1744 is a straight oil containing extreme pressure additives for general machining of all metals, including Magnesium. Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals. Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage. Immunol® S-6-H is a detergent type cleaner for soak tank cleaning and degreasing of ferrous and non-ferrous parts. It emulsifies oils such as drawing compounds and rust preventives, and removes mill soils and smut very effectively. It may also be used for general purpose cleaning as a “bucket” solvent to replace more flammable or toxic materials. If used on aluminum, extended immersion times (one hour or more) produce darkening. Use Immunol® S-6-I as an alternative for aluminum. | 
