Actispeed® 450 is a combination acid pickling inhibitor and descaling accelerator for hydrochloric acid pickling systems. This additive inhibits acid attack on base metal and accelerates scale removal from hot-rolled steels by up to 30%. Activol® 1874 is a pickling inhibitor for all sulfuric acid pickling operations. Activol® 1874 contains all the desired properties of a strong acid pickling additive including: high efficiency on carbon steels, good protection to alloys and silicon steels, a foam cover, wetting agents, excellent acid and temperature stability and fume control. Instantly soluble in sulfuric acid baths, it reduces acid drag-out and provides more uniform removal of scale from rod, wire and sheet steel. This product is also available in non-foaming version (Activol® 1874 –NF) for compatibility with sulfuric acid reclamation processes. Activol® 7711-B is a highly efficient hydrochloric acid corrosion inhibitor for use in chemical cleanouts of steam generation equipment such as boilers, pulp digesters, and in secondary oil recovery operations using hydrochloric acid. Activol® 9012 is a powdered inhibitor for use in pickling operations using sulfamic acid. It imparts maximum inhibiting properties to sulfamic acid solutions reacting on steel. Use at 1-2% of the sulfamic acid weight in pickling baths, for reducing metal loss, fume prevention and reduction of hydrogen embrittlement. This product is also used to clean boilers or other steam generation equipment where sulfamic acid is utilized. Hamikleen® 9002 is a free-flowing granular additive for use in sulfuric acid pickling. This product produces a brighter, more uniformly pickled steel surface and provides excellent wetting properties to the bath. Activol® 1357 is an additive for sulfuric, hydrochloric, nitric and hydrofluoric acid pickling and cleaning solutions and may be used as specialty additive on titanium in nitric acid baths. Activol® 1357 reduces surface tension, accelerates acid action and provides detergency in solution. This product also serves as a mild inhibitor to minimize acidic attack on base metal during scale removal. It promotes complete rinsing and reduces fume formation. Activol® 1658 is a wetting and detergency additive for pickling and acid brightening baths. It is extremely stable to both high electrolyte and oxidation and can be used in the nitric and nitric/hydrofluoric acid combinations used for pickling stainless steels, zirconium, titanium, and other highly alloyed or exotic metals. It is classified as a medium “foamer” and will produce a foam blanket to hold down toxic oxide fumes and steam vapor. Activol® 1590-CP is an additive for hydrochloric acid pickling solutions which imparts both “wetting” and detergency, while inhibiting base metal attack and offering fume control. Particularly useful in low temperature batch or continuous operations, Activol® 1590-CP prevents over-pickling and provides acid savings, reduces metal weight loss, fumes and hydrogen embitterment. This product produces a bright uniform finish, prolongs pickle tank life, increases the speed of the pickling process and makes clear solutions in all acid concentrations which will not break down in acid storage tanks. Activol® 1793-B is a sulfuric acid inhibitor for batch pickling. It is one of our strongest inhibitors, is a good “wetter” and provides a more uniform pickle and a better rinse. Additionally, it eliminates acid fumes and reduces hydrogen embrittlement. Pickle Life 1673-D (acid extender) and Activol® 1793-B can be used in combination to extend the life of the acid bath to iron levels of 7-12%. Activol® 1793-NF is a non-foaming version which can be used in operations utilizing combustion heating. Activol® 1803 is the most efficient member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, high % efficiency (protection), excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces. Activol® 2105 is the latest development in hydrochloric acid inhibitor technology, surpassing the level of protection to the base steel afforded by its predecessor, Activol® 1803. Activol® 2105 contains all the performance characteristics of a good pickling inhibitor, such as fume suppression, free-rinsing, reduced chloride carry-over, as well as reduced acid consumption due to superior base metal protection. | 
