Hamikleer® 1990 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for light to moderate duty machining operations, such as grinding, turning, drilling, reaming, and tapping. Hamikleer® 1990 is non-staining to non-ferrous metals and has a liquid residual film, which keeps machinery parts moving and provides good lubrication and rust protection to steel. It offers excellent wetting to keep swarf and fines from depositing on machinery, while enabling them to settle out quickly in central sumps. It rapidly rejects contaminants such as most tramp oils. It is highly bacterial resistant, which extends sump life of central and individual systems. Hamikut® 100 is a new technology soluble oil metalworking lubricant that offers excellent bioresistance and stability to coolant systems. It can perform a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. It offers cooling, excellent friction reduction, extremely low foam and will not sour with microbial contamination. It is free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants. It is ideal for use in central systems. It is extremely easy to handle using filtration or centrifuge, and will not clog paper or filters. Hamikut® 9036-B is an enhanced heavy duty soluble oil lubricant for heavy duty machining of ferrous and non-ferrous metals, including zinc. Provides corrosion protection, is low foaming, possesses excellent emulsion stability and produces good micro-finishes. It provides improved biological control capability for longer sump life in re-circulating systems. Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion. Hamiterge® 711-2 is an extremely high strength powdered alkaline cleaner consisting of exceptional wetting agents and detergents in a base of alkaline builders. It is an immersion cleaner designed for low or high temperature applications. It will remove rolling oils and other mill soils from all steel surfaces, including stainless and galvanized. It is also applicable for use in high speed scrubber systems. It is lower foaming at higher operating temperatures, (160 F and above) and is completely free rinsing with water. It is also available in a low foam version (Hamiterge® 711-2-LF) for spray washers. Hamiterge® 2031-C2 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, metallic chips and fines, oily soils, and shop or mill dirt from sheet steel surfaces and other ferrous metal parts. It is designed for usage in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperature conditions in dilutions with water. It is low foaming, completely biodegradable and free rinsing. It splits out cleaned soils readily and maintains low foaming characteristics when soils accumulate that can form soaps. Hamiterge® 2038-LFM is a highly caustic liquid alkaline cleaner for immersion cleaning operations requiring a strongly alkaline solution. It is for removal of extremely difficult soils from ferrous metal surfaces at elevated temperatures. It has excellent wetting and detergency. It can be used at high concentration and elevated temperature for removal of phosphate coatings and drawing lube residues from steel parts, such as tube, rod, bar, or wire. It is completely soluble in water and is free rinsing. Purgitol® S-8 is a concentrated liquid cleaner for rolling oil and other mill soil removal from steel strip by application through spray headers at the last stand on a four or five stand cold reducing tandem mill. Purgitol® S-8 may also be used as a water soluble straightener lubricant for wire or rods on roll straightener equipment. It has excellent corrosion protection, boundary lubrication and is low foaming (for recirculating sprays). Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage. Immunol® 985-J is a low foaming detergent spray cleaner for metal surfaces. It contains rust preventives which protect ferrous metals after cleaning for short periods indoors. It is a completely nitrite free product. It removes mineral and fatty mill soils completely without saponification; therefore, it is not spent in use. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. It protects cast iron and ferrous metals submerged in its solution indefinitely. It forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Hamiterge® 8922 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, drawing and stamping lubricants, rust preventives, metallic chips and fines, and other oily soils, shop or mill dirt from steel strip, wire, rod and bars. It is designed for use in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperatures in dilutions with water. It is low foaming, completely biodegradable, and free rinsing. It will not buildup hard water deposits and contains no phosphates. Activol® 1803 is the most efficient member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, high % efficiency (protection), excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces. Activol® 2105 is the latest development in hydrochloric acid inhibitor technology, surpassing the level of protection to the base steel afforded by its predecessor, Activol® 1803. Activol® 2105 contains all the performance characteristics of a good pickling inhibitor, such as fume suppression, free-rinsing, reduced chloride carry-over, as well as reduced acid consumption due to superior base metal protection. Cellotone® 50 is a highly alkaline powder based material containing chelants and nonionic wetting agents. Low foaming properties makes it suitable for “wet end” boil-outs where a high degree of agitation usually exists. Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for light or heavy machining operations including: boring, drilling, reaming, tapping, and threading. It is non-staining to non-ferrous metals, e.g., copper, brass, and aluminum and has a liquid residual film, which keeps machinery parts moving.
Hamiterge® 711-5 is a powdered alkaline cleaner designed for immersion cleaning of mill soils from steel surfaces and can be used on aluminum, copper and brass. It is also available in a low foam version (Hamiterge® 711-5-LF) for spray washers. Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications. Kleerkut® 4900 Performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. Kleerkut® 4900 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming , easy to clean using filtration or centrifuge, and long lasting.
Kleerkut® 4900 has two "sister" products: Kleerkut® 4900-LT and Kleerkut® 4900 HD. For more information on these products, please inquire at: info@HarryMillerCorp.com. Mill Purge® 1812 is an industrial maintenance cleaner for floors, machinery, sumps, kettles and vats, etc. It is also used in ultrasonic cleaning, dip tank cleaning of steel, cast iron and aluminum parts and equipment. | 
