News

June 21, 2015
Shale Image for Fracking Blog

Hydraulic Fracturing (Fracking) and Water Quality

The EPA has released their draft report on the impact of Fracking (Hydraulic Fracturing) operations and drinking water. In their press release, the EPA states: “Assessment […]
June 18, 2015
Harry Miller Corp Bruce Entwisle and Nick Ariano

Harry Miller Corp Supports Abington Hospital

The Harry Miller Corporation is a supporter of Abington Hospital and a proud sponsor of The June Fete Gala Program. This photo of HMC Vice-President Nick […]
June 2, 2015

Hamico® 8936 – Rinse Aid

Hamico® 8936 Rinse Aid is an additive for rinse systems after pickling steel using hydrochloric or sulfuric acids. Hamico® 8936 Rinse Aid prevents the formation of iron […]
June 2, 2015

Hamico® 8934 – Rinse Aid

Hamico® 8934 Rinse Aid is a stain preventing additive for rinse systems for use after hydrochloric or sulfuric acid pickling operations. It is an acidic product possessing corrosion […]
June 2, 2015
Turbulent Pickling Testing - Johnston and Ariano

New Pickling Design Unveiled

A Brand New Technology David M. Price, Scientist-Processes and Control for ArcelorMittal, visited Harry Miller Corp. on May 19th, 2015 to view the company’s laboratory pickling […]
June 1, 2015

Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and […]
June 1, 2015

Activol® 8402 Economical Acid Inhibitor

Activol® 8402 is the most economical member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic […]
May 18, 2015

Rainkote® NC – Stain Prevention Additive

Rainkote® NC is an additive to prevent line-stop stain in the rinse section of hydrochloric or sulfuric acid pickling lines. It is an acidic product possessing […]
May 14, 2015

Visit to Japan – May 2015

May 8th-14th, Harry Miller President, Bruce Entwisle, visited Daisho Seiki Corporation outside Osaka, Japan to qualify Harry Miller Products for use in their machines. While there, he […]
December 10, 2014

Potentol® 2804 – Wetting Acid Inhibitor for Fracking Operations

Potentol® 2804 is a highly efficient (99.5% protection on most grades of steel) acid corrosion inhibitor. It is often used in fracking operations and in other […]
December 10, 2014

Potentol® 2803 – Organic Acid Inhibitor for Fracking Industry

Potentol® 2803 is an efficient (95% steel protection figures) organic acid inhibitor for use in acidizing operations and chemical cleaning applications in hydrochloric acid. Potentol® 2803 […]
October 7, 2014

Congratulations to Our Chemist, Simi John!

Simi John, HMC Developmental Chemist, will be expanding the size of her family in December of this year! The company recently hosted a baby shower to […]
September 15, 2014

Harry Miller Corp Renews ISO 9001:2008 Certification

Harry Miller Corp has attained ISO 9001:2008 certification. An official audit of the Harry Miller Corp quality program was conducted on September 11th, resulting in the […]
August 12, 2013
Harry Miller Corp Co-op Student wins STLE Scholarship - Anthony Rose of Drexel

Drexel Co-Op Student Wins STLE Scholarship

Released August 12, 1013 — Anthony Rose, a Drexel Co-Op student working for Harry Miller Corporation, has been awarded a 2013 STLE Philadelphia Section scholarship. Rose […]
June 10, 2013

Aerokut® 500-M – Heavy Duty Cutting Oil

Aerokut® 500-M is a viscous petroleum-based cutting oil specifically compounded for medium to heavy-duty applications. Aerokut® 500-M is fortified with chlorinated and sulfurized extreme pressure additives […]
June 10, 2013

Aerokut® 25 Medium Viscosity Straight Oil

Aerokut® 25 is a petroleum-based lubricating oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 25 […]
June 10, 2013

Hamidraw® 1945-300 Heavy Duty Stamping and Drawing Lubricant

Hamidraw® 1945-300 is a heavy-duty stamping, blanking, and drawing lubricant for all metals. Hamidraw® 1945-300 has a viscosity of SUS 300 at 100 F. It contains […]
June 10, 2013

Aerokut® 77 – Cutting Oil and Screw Machine Lubricant

Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 […]
June 10, 2013

Aerotap®15 – Low Viscosity Cutting Oil

Aerotap®15 is a low-viscosity petroleum-based cutting oil specially compounded for medium to heavy duty applications. Aerotap® 15 is fortified with chlorinated extreme pressure additives to provide […]
March 5, 2013

Activol 1803 Protects J932 Steel During Pickling

One of our customers wanted to find a way to prevent gage loss on a continuous pickling line. Our labs conducted tests to find a solution […]
February 6, 2013

Kleenlube 68 – Higher Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 68 is a premium quality petroleum-based lubricant specially compounded for machine tool slideways and lathes. Kleenlube 68 contains special extreme pressure additives and tackifiers designed […]
February 6, 2013

Aerokut® 99-SS – Heavy-Duty, Low-Odor Cutting Oil

Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified […]
February 6, 2013

Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 […]
February 6, 2013

Aerogrind® 21 – Medium-Viscosity, Sulfur-Free Cutting Oil

Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to […]