News - Page 3 of 9 - Harry Miller Corp

February 6, 2013

Kleenlube 32-B – Lower Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 32-B is a premium quality petroleum-based lubricant specially compounded for primary use as a hydraulic lubricant in machines that require an economical and versatile oil. […]

February 6, 2013

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure […]

February 6, 2013

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no […]

February 4, 2013

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme […]

February 4, 2013

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure […]

April 23, 2012

Rainkote® 75 – Soluble Oil Rust Preventive

Rainkote® 75 is an emulsifiable oil-based rust preventive. The resulting thin oily film provides indoor protection of steel, cast iron, or galvanized surfaces for up to […]

January 6, 2012

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

January 6, 2012

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

January 6, 2012

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual […]

January 6, 2012

Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.

January 6, 2012

Kleerkut® 4900-HD – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-HD has an enhanced, upweighted synthetic lubricant package, compared to Kleerkut 4900, for heavier duty applications. This product is chlorine-free.

January 6, 2012

Kleerkut® 4900-HP – Medium Duty Coolant

Kleerkut® 4900-HP is a lower oil version of 4900 designed for light-to-medium duty applications. This product has more reserve alkalinity to enhance pH stability and provide […]

January 6, 2012

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and […]

January 6, 2012

Hamikut® 9036-HP – Soluble Oil Coolant

Hamikut® 9036-HP is a soluble oil designed for light-to-medium duty applications on a wide variety of materials. It has excellent bioresistance, is low foaming and has […]

November 16, 2011

Harry Miller Corp Expands To South Africa

Released: November 9, 2011 Harry Miller Corp announces the formation of “Harry Miller Corp, South Africa” with its new General Manager, Mohau Lekopa. Mohau brings years […]

March 7, 2011

HMC Featured in MetalForming Magazine Article

Released: March 7, 2011 Greener, non-chlorine based lubricants are one of the items featured in the March 2011 issue of MetalForming Magazine. Among the experts quoted […]

March 7, 2011

Business Leaders Meet with Democratic Leadership

Released: March 7, 2011 Harry Miller Corp President, Bruce K. Entwisle, along with industry leaders from 20 industries in the Philadelphia area, recently met with a […]

February 3, 2011

Hamico® 178

Hamico® 178 is a liquid rust remover designed to dissolve rust on contact. Hamico® 178 is used full strength and can be applied by brushing or […]

December 27, 2010

Kleerkut® 4960 – Semi-Synthetic Coolant for Aluminum

Kleerkut® 4960 performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals and offers significantly upgraded lubrication properties for aluminum machining […]

December 17, 2010

Immunol® 438 – Magnetic Inspection NDT Additive

Immunol® 438 is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., […]

December 17, 2010

Immunol® 1392-J – Water Soluble Rust Preventive

Immunol® 1392-J is odorless and dissolves instantly in any kind of water (even the very hardest) to make a clear, thin solution. Immunol® 1392-J has a […]

December 17, 2010

Immunol® 791-J – Mild Cleaner and Rust Inhibitor

Immunol® 791-J is an ultrasonic test tank additive that will dissolve instantly in any kind of water to make a clear, thin solution. Immunol® 791-J is […]

December 17, 2010

Hamikleer® 712 and 712-2 – Synthetic Couplants

Hamikleer® 712 and 712-2 are water soluble synthetic couplants for ultrasonic testing replacing glycerine. The buffering action of this Hamikleer® 712 series permits testing of many […]

December 17, 2010

Hamiterge® 1930 – Solvent Cleaner for Ink and Glue

Hamiterge® 1930 is an extremely light colored, non-aqueous, transparent cleaning solvent used in many applications for removal of oils, greases, mill soils, adhesive residues, etc. as […]