News

November 18, 2010

Hamikut® 1937-A – Soluble Oil Coolant

Hamikut® 1937-A is a medium-duty, soluble oil containing extreme pressure additives used for machining and grinding ferrous and non-ferrous metals, including zinc. It provides extremely good […]
November 18, 2010

Hamikut®1860-LC – Soluble Oil Coolant

Hamikut®1860-LC is a heavy duty soluble oil cutting and machining fluid. It contains extreme pressure lubricating additives which are low in color and odor, yet provide […]
November 18, 2010

Hamikut® 100 – Soluble Oil Coolant

Hamikut® 100 is a new technology soluble oil metalworking lubricant that offers excellent bioresistance and stability to coolant systems. It can perform a wide variety of […]
November 18, 2010

Hamikleer® 8307-A and 8307-B

Hamikleer® 8307-A and 8307-B are water soluble synthetic couplants for contact ultrasonic testing replacing glycerin. They are chemically pure couplants that contain little or no contamination, […]
November 18, 2010

Hamikleer® 2095 – Synthetic Coolant

Hamikleer® 2095 is a synthetic grinding and machining coolant concentrate designed to be used on both ferrous metals, non-ferrous metals, and also on milling of scale […]
November 18, 2010

Hamikleer® 1995 – Heavy Duty Synthetic Coolant

Hamikleer® 1995 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations […]
November 18, 2010

Hamikleer® 1990 – Bio-Resistant Coolant

Hamikleer® 1990 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations […]
November 18, 2010

Hamikleer® 1975 HD – Heavy Duty Synthetic Coolant

Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for medium to heavy duty machining operations including: […]
November 18, 2010

Hamikleer® High Viscosity U.T. Couplants

Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals: Hamikleer® 712-HV-1 Viscosity – 38,000 – […]
November 18, 2010

Hamicote® EF-317 – Lime Bath Additive

Hamicote® EF-317 is an additive for lime or borax solutions to improve cohesive and adhesive properties and to disperse and suspend lime or borax more uniformly […]
November 18, 2010

Hamicote® D-20-NL – Forging Lubricant

Hamicote® D-20-NL (and variations) are used for die casting, press forging, drop forging, upset forging, extruding lubricant, mold lubricant, drawing, stamping, preventing rust and white rust. […]
November 18, 2010

Hamikleen® 9002 – Sulfuric Acid Additive

Hamikleen® 9002 is a free-flowing granular additive for use in sulfuric acid pickling. This product produces a brighter, more uniformly pickled steel surface and provides excellent […]
November 18, 2010

Hamico® Neutralizer 809-L

Hamico® Neutralizer 809-L is a combination of liquid alkalis and surface-active (wetting) agents designed specifically for neutralizing acidic residues from ferrous metals after pickling operations.
November 18, 2010

Hamico® EDM – EDM Oil

Hamico® EDM is a light colored, transparent, odorless oil for use as the dielectric fluid in EDM (electric discharge machining) operations. It is an extraordinarily pure […]
November 18, 2010

Hamico® 8928 – pH Conditioner

Hamico® 8928 is an additive for metalworking fluids to improve effectiveness of the biocides in the fluid and to raise and stabilize pH. It possesses reserve […]
November 18, 2010

Hamico® 1003 – Lubricating Oil

Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be […]
November 18, 2010

Hamico® 863-EP

Hamico® 863-EP Base is normally used as received, but can be diluted with oil, solvents, or water, depending on the operation. It may be applied by […]
November 18, 2010

Hamico® 578-C

Hamico® 578-C is a liquid rust remover concentrate designed to dissolve rust on contact with steel or iron surfaces. The time required for rust removal is […]
November 18, 2010

Hamico® 142

Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light […]
November 18, 2010

Hamico® 138-L

Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to […]
November 18, 2010

Hamidraw® 9100-B – Non-Chlorinated Stamping Lubricant

Hamidraw® 9100-B is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping. It contains a polymeric lubricant package which provides the extreme pressure […]
November 18, 2010

Hamidraw® 9014-LV and 9019 Hydroforming Lubricants

Hamidraw® 9014-LV and 9019 are tube hydroforming lubricants for applications to the outer diameter of parts being formed into dies. Both products are straight petroleum based […]
November 18, 2010

Hamidraw® 9000-F – Non-Chlorinated Drawing Lubricant

Hamidraw® 9000-F is an entirely non-chlorinated extreme pressure lubricant for moderate duty drawing and stamping of steel and non-ferrous metals such as copper, brass or bronze. […]
November 18, 2010

Hamidraw® 1945 Series Stamping Lubricants

Hamidraw® 1945 Series is a lubricant for stamping, blanking, and deep drawing of all metals. It is a heavy duty oil and can be cut back […]