- Custom Solutions for the Metalworking Industry Since 1936
- 215.324.4000
- orders@HarryMillerCorp.com
News
November 18, 2010
Hamico® 863-EP Base is normally used as received, but can be diluted with oil, solvents, or water, depending on the operation. It may be applied by […]
Do you like it?
November 18, 2010
Hamico® 578-C is a liquid rust remover concentrate designed to dissolve rust on contact with steel or iron surfaces. The time required for rust removal is […]
Do you like it?
November 18, 2010
Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light […]
Do you like it?
November 18, 2010
Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to […]
Do you like it?
November 18, 2010
Hamidraw® 9100-B is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping. It contains a polymeric lubricant package which provides the extreme pressure […]
Do you like it?
November 18, 2010
Hamidraw® 9014-LV and 9019 are tube hydroforming lubricants for applications to the outer diameter of parts being formed into dies. Both products are straight petroleum based […]
Do you like it?
November 18, 2010
Hamidraw® 9000-F is an entirely non-chlorinated extreme pressure lubricant for moderate duty drawing and stamping of steel and non-ferrous metals such as copper, brass or bronze. […]
Do you like it?
November 18, 2010
Hamidraw® 1945 Series is a lubricant for stamping, blanking, and deep drawing of all metals. It is a heavy duty oil and can be cut back […]
Do you like it?
November 18, 2010
Hamidraw® 1829 is an ultra-heavy duty, water soluble, extreme pressure lubricant, offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. It is designed […]
Do you like it?
November 18, 2010
Hamidraw® 1828-LC is a light to medium duty, water soluble drawing compound for lubrication of steel and non-ferrous metals in drawing operations. It has a reduced […]
Do you like it?
November 18, 2010
Hamidraw® 1828-DS is a medium duty, water soluble drawing compound for lubrication of steel and non-ferrous metals in drawing operations.
Do you like it?
November 18, 2010
Hamidraw® 1828-A is a heavy duty, water soluble, extreme pressure lubricant offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. The residual film […]
Do you like it?
November 18, 2010
Hamidraw® 497-MX-2 is composed of extreme pressure resisting chlorinated base and synthetic esters. Pigmented and non-flammable, this product is completely removable in mineral solvents, chlorinated solvents […]
Do you like it?
November 18, 2010
Hamidraw® 497-B is composed of extreme pressure resisting chlorinated base and synthetic esters. It contains no pigments, is non-flammable and is completely removable in mineral or […]
Do you like it?
November 18, 2010
Cellotone® 122 is an acidic, straw colored, clear liquid material containing a mixture of biodegradable, non-ionic detergents and solvents. It is designed for boil-out and cleaning […]
Do you like it?
November 18, 2010
Cellotone® 62-L is a caustic soda based liquid containing chelants and anionic wetting agents. A low foaming nature makes it suitable for “wet end” boil-outs where […]
Do you like it?
November 18, 2010
Cellotone® 50 is a highly alkaline powder based material containing chelants and nonionic wetting agents. Low foaming properties makes it suitable for “wet end” boil-outs where […]
Do you like it?
November 18, 2010
Aquatemp® 8304-WT is a new synthetic chemical mill cleaner/rust preventive combination providing maximum “dry finish” rust protection. It is used where no reduction is required or […]
Do you like it?
November 18, 2010
Aquatemp® 1860-LV-2 is a low viscosity temper mill lubricant for application on coated products during tempering or “skin pass” processes. It cleans the mill and strip, […]
Do you like it?
November 18, 2010
Aquaroll® 7606-FO is an emulsifiable cold rolling lubricant for steel, copper and brass. It is applicable for use in grade rolling of blanks in tableware manufacture. […]
Do you like it?
November 18, 2010
Actispeed® 450 is a combination acid pickling inhibitor and descaling accelerator for hydrochloric acid pickling systems. This additive inhibits acid attack on base metal and accelerates […]
Do you like it?
November 18, 2010
Activol® 2105 is the latest development in hydrochloric acid inhibitor technology, surpassing the level of protection to the base steel afforded by its predecessor, Activol® 1803. […]
Do you like it?
November 18, 2010
Activol® 9012 is a powdered inhibitor for use in pickling operations using sulfamic acid. It imparts maximum inhibiting properties to sulfamic acid solutions reacting on steel. […]
Do you like it?
November 18, 2010
Activol® 1874 is a pickling inhibitor for all sulfuric acid pickling operations. Activol® 1874 contains all the desired properties of a strong acid pickling additive including: […]
Do you like it?
