November 18, 2010

Activol® 1803 – Hydrochloric Acid Inhibitor

Activol® 1803 is the most efficient member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and […]
November 18, 2010

Activol® 1793-B – Sulfuric Acid Additive

Activol® 1793-B is a sulfuric acid inhibitor for batch pickling. It is one of our strongest inhibitors, is a good “wetter” and provides a more uniform […]
November 18, 2010

Activol® 1658 – Pickling Acid Additive

Activol® 1658 is a wetting and detergency additive for pickling and acid brightening baths. It is extremely stable to both high electrolyte and oxidation and can […]
November 18, 2010

Activol® 1590-CP – Acid Inhibitor

Activol® 1590-CP is an acid additive for hydrochloric acid pickling solutions which imparts both “wetting” and detergency, while inhibiting base metal attack and offering fume control. […]
November 18, 2010

Activol® 1357 – Acid Inhibitor

Activol® 1357 is an acid additive for sulfuric, hydrochloric, nitric and hydrofluoric acid pickling and cleaning solutions and may be used as specialty additive on titanium […]
November 18, 2010

Atmoscleer® 8001 – Foam Blanket Additive

Atmoscleer® 8001 is a foam blanket additive for hydrochloric acid batch pickling baths. It imparts a densely packed, uniform layer of foam on the surface of […]
November 18, 2010

Atmoscleer® 1785 – Fume Suppressant

Atmoscleer® 1785 is a foam blanket and fume suppressant for sulphuric acid pickle baths. Small amounts produce a heavy foam which cuts fumes and saves energy. […]
November 18, 2010

Aqualube® 2029 – Synthetic Stamping Lubricant

Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides […]
November 18, 2010

Steelgard® 9060 — Rust Prevention for Outdoor Storage

Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. […]
November 11, 2010

Kleerkut® 4960: Semi-Synthetic Coolant for Aluminum

Harry Miller Corp has recently completed work on an upgrade for the Kleerkut® 4900 series of products. Kleerkut® 4960 will provide significantly upgraded lubrication properties for […]
October 15, 2010

Exchange Student Internship at Harry Miller Corp

Released: Wednesday, October 28, 2010 Harry Miller Corp recently hosted Emilie Darroman, a French Exchange student through the Council on International Educational Exchange (CIEE). Ms. Darroman, […]
February 9, 2010

Harry Miller Corp and CJ Haas Company Reunite

Released: Tuesday, February 09, 2010 After a parting of the ways over 60 years ago, Harry Miller Corp and The CJ Haas Company have “re-united” as […]
September 10, 2008

Harry Miller Corp President Meets McCains in PA

Released: Wednesday, September 10, 2008 Bruce Entwisle met John and Cindy McCain during today’s campaign stop in Philadelphia. The meet and greet took place at Jack […]
May 26, 2008

Harry Miller Corp Receives 2008 Best of Philadelphia Award

Released: Monday, May 26, 2008 WASHINGTON D.C.– Harry Miller Corp has been selected for the 2008 Best of Philadelphia Award in the Industrial Inorganic Chemicals category […]
July 9, 2006

Harry Miller Corp Launches Triazine-Free Synthetic Metalworking Coolant

Released: Sunday, July 09, 2006 (Philadelphia, PA) July 9, 2006 – Harry Miller Corporation has announced a new product that addresses recent supply shortage issues and […]
June 17, 2005

Coolant offers High Performance, Low Environmental Impact for Metalworking Industry

Released: Friday, June 17, 2005 Harry Miller Corp. ( announces Kleerkut 4900, a semi-synthetic coolant specially designed for industrial machining and grinding of high-temperature alloys, stainless […]
October 1, 2004

Kleerkut 3900 Featured in Lubes-n-Greases Magazine

Released: Friday, October 01, 2004 Harry Miller Corp’s solution, Kleerkut 3900, was featured the October 2004 edition of Lubes-n-Greases Magazine ( in the “Product News” section. […]
December 8, 2003

Hamiterge® 2038-LFM

Released: Monday, December 08, 2003 PHILADELPHIA, PA – THE HARRY MILLER CORPORATION has introduced a new alkaline, liquid immersion cleaner, Hamiterge® 2038-LFM. This product contains a […]
December 2, 2003

ISO 9001:2000 Registration

Released: Tuesday, December 02, 2003 PHILADELPHIA, PA – THE HARRY MILLER CORPORATION was registered in October 2003 by QMI (Division of CSA Group), which is one […]
March 18, 2002

New Synthetic Coolants Introduced

Released: Monday, March 18, 2002 The Harry Miller Corp. has released two newly formulated synthetic coolants for machining and grinding to the marketplace. HAMIKLEER 1975 for […]
March 18, 2002

HMC Gains ISO-9002 Quality Standard Registration

Released: Monday, March 18, 2002 Philadelphia, Pa.— The Harry Miller Corporation, a chemical specialty manufacturer of steel processing chemicals and metalworking lubricants, rust preventatives, cleaners and […]
April 30, 2001

New Synthetic Stamping Lubricant Program

Released: Monday, April 30, 2001 The Harry Miller Corp. has embarked on a product development program in water miscible synthetics for the stamping and fineblanking industries. […]
January 12, 1998

Non-Chlorinated Drawing Compound

Released: Thursday, January 08, 1998 Philadelphia, Pa.— Hamidraw 9000 has been developed by Harry Miller Corp. to complement its line of chlorinated water soluble oils. Hamidraw […]
November 12, 1997

Broad Application Semi-Synthetic Coolant

Released: Wednesday, November 12, 1997 Kleerkut 1900-FRC has been developed by Harry Miller Corp. to meet the needs of the marketplace as well as to enhance […]