Hamikleer® X-231-LF – Synthetic Grinding Coolant

Hamikleer® X-231-LF is a synthetic lubricant well suited for roll grinding and Blanchard grinding. It provides solution clarity, bioresistance; low foam, and longevity in recirculating system. The use dilution is 2-5% in water.

Kleerkut® 4900 – High-Oil Semi-Synthetic Coolant

Kleerkut® 4900 is a high oil semi-synthetic that performs a wide variety of machining and grinding applications on both ferrous and non-ferrous materials.  It provides excellent finishes, is extremely bio-resistant, splits out tramp oils and has superior rust protection.

Kathon™ CC – Biocide

Kathon™ CC is a broad-spectrum microbiocide that is extremely effective against bacteria, fungi, mold, and yeast even at low treatment levels. This unique formula allows the user to quickly test for the concentration of the biocide right at the sump. It is recommended for use in soluble, semi-synthetic and synthetic metalworking fluids and will immediately neutralize most foul odors. Kathon™ CC does not contain or release formaldehyde and does not contribute to ammonia blush common to many other biocides. (Note: Kathon™ is a trademark of Dow Chemical.)

Immunol® 1809-J – Ultrasonic NDT Additive

Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications.

Immunol® 1228 – NDT Additive

Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage.

Hamilube® 1744 – Cutting Oil

Hamilube® 1744 is a straight oil containing extreme pressure additives for general machining of all metals, including Magnesium.

Hamikut® 9120-NC – Chlorine-Free Soluble Oil Coolant

Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion.

Hamikut® 9036-B – Soluble Oil Coolant

Hamikut® 9036-B is an enhanced heavy duty soluble oil lubricant for heavy duty machining of ferrous and non-ferrous metals, including zinc. Provides corrosion protection, is low foaming, possesses excellent emulsion stability and produces good micro-finishes. It provides improved biological control capability for longer sump life in re-circulating systems.

Hamikut® 1937-A – Soluble Oil Coolant

Hamikut® 1937-A is a medium-duty, soluble oil containing extreme pressure additives used for machining and grinding ferrous and non-ferrous metals, including zinc. It provides extremely good emulsion stability and is highly tolerant to other contaminants typically carried into emulsions from prior operations.

Hamikut® 100 – Soluble Oil Coolant

Hamikut® 100 is a new technology soluble oil metalworking lubricant that offers excellent bioresistance and stability to coolant systems. It can perform a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. It offers cooling, excellent friction reduction, extremely low foam and will not sour with microbial contamination. It is free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants. It is ideal for use in central systems. It is extremely easy to handle using filtration or centrifuge, and will not clog paper or filters.