Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Activol® 8402 Economical Acid Inhibitor

Activol® 8402 is the most economical member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, quality protection, excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces.

Aerokut® 500-M – Heavy Duty Cutting Oil

Aerokut® 500-M is a viscous petroleum-based cutting oil specifically compounded for medium to heavy-duty applications. Aerokut® 500-M is fortified with chlorinated and sulfurized extreme pressure additives as well as a special high-performance “moly” lubricant to provide long tool life and good finishes. The high degree of chlorination provides Aerokut® 500-M with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.

Aerokut® 77 – Cutting Oil and Screw Machine Lubricant

Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 is fortified with chlorinated and special sulfurized extreme pressure additives designed to provide both high and low temperature extreme pressure lubrication without any staining of copper based alloys. Aerokut® 77 is ideal for machines which suffer from excessive cross-contamination which would otherwise reduce machine efficiency.

Aerotap®15 – Low Viscosity Cutting Oil

Aerotap®15 is a low-viscosity petroleum-based cutting oil specially compounded for medium to heavy duty applications. Aerotap® 15 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes The high degree of chlorination provides Aerotap® 15 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other alloys where high temperatures are encountered.

Aerokut® 99-SS – Heavy-Duty, Low-Odor Cutting Oil

Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. It has very high anti-weld and lubricity properties, and the low viscosity helps to dissipate heat and flush chips from the work area. The light color, transparent, and low-odor oil improves workpiece visibility.

Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. The added chlorine provides Aerotap® 16-LC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.

Aerogrind® 21 – Medium-Viscosity, Sulfur-Free Cutting Oil

Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes. The high degree of chlorine provides Aerogrind® 21 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other hard alloys where high temperatures are encountered.

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure additives and synthetic sulfurized additives, along with synthetic anti-wear components, to provide exceptional die life and part finish, and cleaner tools and dies. The high viscosity of PE-50 provides high film strength, even at high temperatures to carry through multiple stages with a single application. Because of the high concentration of extreme pressure agents, PE-50 is also used in coining, extrusion, and other occasional heavy-duty work.

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorous. Hamilube® 1955-B is transparent to allow viewing of the work piece during machining. Hamilube® 1955-B contains no active sulfur and is suitable for use with non-ferrous metals.