Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)
Hamikleer® 1975-RP – Synthetic Coolant
Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.
Hamikleer® 1975-XS – Synthetic Coolant
Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.
Hamikleer® 1975 – Synthetic Coolant
Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.
Hamikleer® 712 and 712-2 – Synthetic Couplants
Hamikleer® 712 and 712-2 are water soluble synthetic couplants for ultrasonic testing replacing glycerine. The buffering action of this Hamikleer® 712 series permits testing of many metals and metallic couples that typically corrode in aqueous-phase couplants. The low halogen content makes the Hamikleer® 712 series the ideal material to use on titanium and other space-age metals, where possible halogen stress corrosion could be a problem. The exceptional water solubility and solution clarity of the Hamikleer® 712 series allows easier rigging and positioning in submerged tank testing. There are several viscosity grades for this product, contact us for a version formulated to meet your specific needs.
Immunol® S-6-I – Aluminum Detergent Cleaner
Immunol® S-6-I can be used for all general cleaning and degreasing of ferrous and non-ferrous parts and equipment replacing flammable, toxic solvents and alkaline cleaners. Immunol® S-6-I emulsifies oils, mill soils and provides mild indoor rust protection in one operation. used in steel mills, metalworking plants, paper and textile mills as a “general purpose” solvent cleaner. widely used in tumbling and as a “bucket” solvent. Immunol® S-6-I is used as an additive for vibratory deburring or finishing and is inhibited for protection to aluminum.
Hamiterge® 8904 – Alkaline Spray Cleaner
Hamiterge® 8904 is a concentrated liquid alkaline spray cleaner for removal of oily films, metallic chips and fines, shop or mill dirt, and lube oil residues from steel and aluminum surfaces. Hamiterge® 8904 is designed for use in single or multi stage power spray washers or roto-brush type washers at elevated or ambient temperature conditions. Hamiterge® 8904 can be diluted with hot or cold water, is low foaming, and free rinsing. Hamiterge® 8904 will not form insoluble residues in hard water and has good oil rejection properties, making it suitable for recirculating systems. Hamiterge® 8904 provides mild rust protection to steel, and it is non-staining to aluminum.
Purgitol® TMB – Sump Cleaner
Purgitol® TMB is used as a sump cleaner and/or additive to soluble oil (or synthetic coolant) systems in machine shops as an emulsifier of “tramp” oils and a system cleaner. Purgitol® TMB loosens sludge and metallic buildup in lines, settles heavy particles, and kills bacteria and fungus while it protects against stains and rust on ground or polished surfaces. Purgitol® TMB can be used on steel, cast and malleable iron, and on non-ferrous metals, however, a darkening of aluminum will occur upon prolonged contact.
Hamiterge® 2073-A – Alkaline Immersion Cleaner
Hamiterge® 2073-A is a concentrated liquid alkaline immersion cleaner for removal of rolling oil residues, metallic chips and fines, oily soils, and shop or mill dirt from tube, bars or flat steel surfaces and other ferrous metal parts. It is designed for use in immersion tanks or roto-brush type cleaning equipment at elevated or ambient temperature conditions in dilutions with water. It is especially effective in removal of powdered and high viscosity drawing lubricants.
Hamikleer® X-231-LF – Synthetic Grinding Coolant
Hamikleer® X-231-LF is a synthetic lubricant well suited for roll grinding and Blanchard grinding. It provides solution clarity, bioresistance; low foam, and longevity in recirculating system. The use dilution is 2-5% in water.