Hamidraw® 1945-300 Heavy Duty Stamping and Drawing Lubricant

Hamidraw® 1945-300 is a heavy-duty stamping, blanking, and drawing lubricant for all metals. Hamidraw® 1945-300 has a viscosity of SUS 300 at 100 F. It contains extreme pressure additives to assist in difficult stamping application. 

Hamilube® 2078 – Stamping Lubricant

Hamilube® 2078 is a lubricant for stamping, blanking and deep drawing of steel, copper or brass. It is light viscosity oil designed for light to medium grade applications. While it is for use as received, it can be cut back with mineral oil for lighter work. The light film which 2078 deposits provides rust protection to steel parts after processing. Removal of the residue from the metal is accomplished with solvent degreasing, detergent, or alkaline cleaning. Hamilube® 2078-B is an upgraded version of Hamilube® 2078 designed to provide more lubricity and a heavier film thickness

Hamico® 863-EP

Hamico® 863-EP Base is normally used as received, but can be diluted with oil, solvents, or water, depending on the operation. It may be applied by dipping, spray, or brushing. It is a combination of extreme pressure lubricants. It is used either neat or with oil. It is used primarily for tapping operations on steel. It will not corrode steel or aluminum on contact, but will stain brass and copper.

Hamico® 142

Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light gauge steel, stainless steel, brass, and aluminum. This product’s evaporation rate is faster than that of Hamico® 138-L.

Hamico® 138-L

Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing.

Hamidraw® 9100-B – Non-Chlorinated Stamping Lubricant

Hamidraw® 9100-B is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping. It contains a polymeric lubricant package which provides the extreme pressure lubricating properties of the chlorinated additives formerly used. Hamidraw® 9100-B is environmentally acceptable and has enhanced removability characteristics.

Hamidraw® 1945 Series Stamping Lubricants

Hamidraw® 1945 Series is a lubricant for stamping, blanking, and deep drawing of all metals. It is a heavy duty oil and can be cut back with mineral oil for lighter work. Removal from the metal can be done with solvents or alkaline cleaners. Hamidraw® 1945 is offered in viscosity grades from 100 SUS to 700 SUS.

Aqualube® 2029 – Synthetic Stamping Lubricant

Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel

Aqualube® 2023 FR – Synthetic Stamping Lubricant

Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film.