Aerokut® 77 – Cutting Oil and Screw Machine Lubricant

Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 is fortified with chlorinated and special sulfurized extreme pressure additives designed to provide both high and low temperature extreme pressure lubrication without any staining of copper based alloys. Aerokut® 77 is ideal for machines which suffer from excessive cross-contamination which would otherwise reduce machine efficiency.

Aerokut® 99-SS – Heavy-Duty, Low-Odor Cutting Oil

Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. It has very high anti-weld and lubricity properties, and the low viscosity helps to dissipate heat and flush chips from the work area. The light color, transparent, and low-odor oil improves workpiece visibility.

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure additives and synthetic sulfurized additives, along with synthetic anti-wear components, to provide exceptional die life and part finish, and cleaner tools and dies. The high viscosity of PE-50 provides high film strength, even at high temperatures to carry through multiple stages with a single application. Because of the high concentration of extreme pressure agents, PE-50 is also used in coining, extrusion, and other occasional heavy-duty work.

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and its alloys.

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 5705 – Cutting Oil

Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals.

Hamilube® 1744 – Cutting Oil

Hamilube® 1744 is a straight oil containing extreme pressure additives for general machining of all metals, including Magnesium.

Hamilube® 1328-N – Cutting Oil

Hamilube® 1328-N contains no chlorinated compounds and only minimal amounts of sulfur and phosphorus. It has a light viscosity to flush away metal chips and provide efficient heat removal from the work and tooling. It is suitable for machining operations such as trepanning, threading, tapping, turning, milling and drilling of steel.

Hamikut®1860-LC – Soluble Oil Coolant

Hamikut®1860-LC is a heavy duty soluble oil cutting and machining fluid. It contains extreme pressure lubricating additives which are low in color and odor, yet provide the greatest degree of lubrication for extreme surface and internal grinding operations where problems, such as burning, often develop. It can be used on carbon steel, stainless, and non-ferrous metals including aluminum, copper, and brass.