PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure additives and synthetic sulfurized additives, along with synthetic anti-wear components, to provide exceptional die life and part finish, and cleaner tools and dies. The high viscosity of PE-50 provides high film strength, even at high temperatures to carry through multiple stages with a single application. Because of the high concentration of extreme pressure agents, PE-50 is also used in coining, extrusion, and other occasional heavy-duty work.

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorous. Hamilube® 1955-B is transparent to allow viewing of the work piece during machining. Hamilube® 1955-B contains no active sulfur and is suitable for use with non-ferrous metals.

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme pressure additives to provide long tool life and good finishes. The high sulfur provides Aerotap 15-NC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered. Aerotap 15-NC contains no chlorine to complicate disposal.

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. Aerokut® 749 also contains anti-wear additives to make it suitable as the machine lubricant as well as the cutting oil in screw machines and other applications where co-mingling of the oils cannot be avoided.

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.

Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.

Kleerkut® 4900-HD – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-HD has an enhanced, upweighted synthetic lubricant package, compared to Kleerkut 4900, for heavier duty applications. This product is chlorine-free.

Kleerkut® 4900-HP – Medium Duty Coolant

Kleerkut® 4900-HP is a lower oil version of 4900 designed for light-to-medium duty applications. This product has more reserve alkalinity to enhance pH stability and provide superior emulsion stability.