Steelgard® 8920-K — Rust Prevention for Acidic Environments

Steelgard® 8920-K is an indoor rust preventive for steel stored in an acidic atmosphere such as a pickling department. It is designed primarily for protection against hydrochloric (muriatic) acid vapors. It deposits an oily film and is a very low odor product. It protects against staining and contact corrosion in tightly wrapped steel coils.

Steelgard® 8703-AT — Long Term Indoor Storage Protection

Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness.

Steelgard® 2005 — Temper Mill Lubricant

Steelgard® 2005 is a new innovation for use as a temper mill fluid for coated products replacing straight oils, solvents or the practice of dry tempering. In addition to preventing white rust, it produces a better “healed-over” surface, reduces roll pick-up, permits higher mill speed and achieves elongations with lower roll force.

Steelgard® 1926-BW — Soluble Oil Rust Preventive

Steelgard® 1926-BW is a soluble oil rust preventive for steel and non-ferrous metals for indoor storage protection of up to 6 months. It maintains excellent stability, even if contaminated by pickle tank residue.

Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Steelgard® 1505-M – Solvent-Based Rust Preventive for Indoor Storage

Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions.

Steelgard® 1505-B – Solvent-Based Rust Preventive

Steelgard® 1505-B is designed for medium-term, thin film corrosion protection for ferrous and non-ferrous surfaces. It displaces moisture and leaves a thin, clear, non-staining film that dries to the touch in three hours. It is readily removed by mineral spirits or mild alkali washes.

Steelgard® 40-M-1 Base — Barium-Free Rust Prevention Additive

Steelgard® 40-M-1 Base is an indoor rust preventive base for all ferrous surfaces including bearing steels, and tool steels. It is a barium free product. It can be used neat for maximum protection, but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.

Steelgard® 20-M-1 Base — Rust Prevention Additive

Steelgard® 20-M-1 Base is a long term indoor rust preventive base for all ferrous surfaces including bearings type and tool steels. Offering excellent non-staining property on stainless or alloys, it can be used in neat form for maximum protection but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.

Hamisolve® 622 – Solvent Cleaner

Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry.