Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)
Immunol® 438 – Magnetic Inspection NDT Additive
Immunol® 438 is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. Immunol® 438 is also an additive to hydrostatic test solutions and provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces.
Immunol® 1392-J – Water Soluble Rust Preventive
Immunol® 1392-J is odorless and dissolves instantly in any kind of water (even the very hardest) to make a clear, thin solution. Immunol® 1392-J has a slightly alkaline pH of 9.0 and is a detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. Immunol® 1392-J protects cast iron and ferrous metals submerged in its solutions for months and forms invisible, quick drying, protective coatings on metal, which insure maximum “indoor” protection. Deposited coatings of Immunol® 1392-J are water soluble and, therefore, will not show to advantage in humidity cabinet tests, due to condensation and the ease of washing the product off with plain water. Immunol® 1392-J will not cloud in water and will not gum or decompose when circulated in water. Immunol® 1392-J has exceptional power of heat absorption and convection. Immunol® 1392-J is not recommended for use on aluminum, copper or brass.
Immunol® 791-J – Mild Cleaner and Rust Inhibitor
Immunol® 791-J is an ultrasonic test tank additive that will dissolve instantly in any kind of water to make a clear, thin solution. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals, but is not recommended for use on aluminum, copper or brass. Immunol® 791-J protects cast iron and ferrous metals submerged in its solution indefinitely and forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Immunol® 791-J will not cloud in solutions of water at temperatures up to 210 (F) and will not gum or decompose when circulated in water.
Immunol® 1228 – NDT Additive
Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage.