Hamico® 8936 – Rinse Aid

Hamico® 8936 Rinse Aid is an additive for rinse systems after pickling steel using hydrochloric or sulfuric acids. Hamico® 8936 Rinse Aid prevents the formation of iron hydroxide slimes which typically occur in rinse tanks and prevents surface discoloration on steel exiting the bath. Hamico® 8936 Rinse Aid complexes ferrous iron, thus preventing it from re-depositing.

Hamico® 8936 Rinse Aid buffers the rinse water against sudden drops in pH, due to acid carryover from pickling tanks and protects from flash rusting after rinse operations. It may be used in hot or cold baths.

Hamico® 8936 Rinse Aid is easy to handle and is not corrosive to the skin.

Hamico® 8934 – Rinse Aid

Hamico® 8934 Rinse Aid is a stain preventing additive for rinse systems for use after hydrochloric or sulfuric acid pickling operations. It is an acidic product possessing corrosion protection and wetting. It is designed to eliminate the brown or reddish stains often experienced on steel exiting a continuous pickler. It eliminates the formation of iron hydroxide slimes which accumulate in rinse tanks as a result of acid bath carryover. Hamico® 8934 Rinse Aid is compatible with waste treatment processes where removal of metals like iron, copper, zinc, and chromium must be accomplished to meet limits for effluents.

This product prevents carryover products from depositing on the immersed steel surface and protects the rinsed surface before drying occurs. Hamico® 8934 Rinse Aid is low-foaming to make water treatment and disposal easier and employs a tracer to make it easy to make concentration determinations using a test kit.

Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Activol® 8402 Economical Acid Inhibitor

Activol® 8402 is the most economical member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, quality protection, excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces.

Potentol® 2804 – Wetting Acid Inhibitor for Fracking Operations

Potentol® 2804 is a highly efficient (99.5% protection on most grades of steel) acid corrosion inhibitor. It is often used in fracking operations and in other acidizing operations and chemical cleaning operations in hydrochloric acid.

Potentol® 2804 offers excellent wetting properties and removes scale deposits on metal surfaces. It also enhances the surface brightness of steel, is fast rinsing and is stable in all acid cleaning solutions.

Potentol® 2804 offers excellent base metal protection and is used in chemical cleanouts of steam generation equipment such as boilers, pulp digesters (in the paper industry), and heat exchangers.

Potentol® 2803 – Organic Acid Inhibitor for Fracking Industry

Potentol® 2803 is an efficient (95% steel protection figures) organic acid inhibitor for use in acidizing operations and chemical cleaning applications in hydrochloric acid.

Potentol® 2803 is used in fracking operations that seek a more environmentally friendly acid inhibitor without heavy metals, arsenic, formaldehyde, acetylenic alcohols or flammable ingredients.

It can also be used in chemical cleanouts of steam generation equipment such as boilers, pulp digesters, and heat exchangers. Potentol® 2803 protects the tubing surfaces and welds in boiler cleaning operations, while the acid used (HCl or formic acids) removes the scale deposits targeted during the cleaning process.

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.

Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.