Activol® 8402 Economical Acid Inhibitor

Activol® 8402 is the most economical member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, quality protection, excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces.

Hamico® 178

Hamico® 178 is a liquid rust remover designed to dissolve rust on contact. Hamico® 178 is used full strength and can be applied by brushing or dipping or spray application with an airless sprayer. The time required for rust removal is dependent upon the degree of rust present. Blush rust is removed in a few minutes, whereas, heavy rust will require longer times and, perhaps, repeated rinsing and application. Removal of Hamico® 178 is easily accomplished by a water rinse.

Steelgard® 8920-K — Rust Prevention for Acidic Environments

Steelgard® 8920-K is an indoor rust preventive for steel stored in an acidic atmosphere such as a pickling department. It is designed primarily for protection against hydrochloric (muriatic) acid vapors. It deposits an oily film and is a very low odor product. It protects against staining and contact corrosion in tightly wrapped steel coils.

Steelgard® 8703-AT — Long Term Indoor Storage Protection

Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness.

Steelgard® 1938-K-1 — Oil Based Rust Prevention for Indoor Storage

Steelgard® 1938-K-1 is an oil based rust preventive for steel, iron or non-ferrous metals protection under normal indoor storage conditions. It provides 6 to 12 months protection in a normal warehouse storage environment.

Steelgard® 1926-BW — Soluble Oil Rust Preventive

Steelgard® 1926-BW is a soluble oil rust preventive for steel and non-ferrous metals for indoor storage protection of up to 6 months. It maintains excellent stability, even if contaminated by pickle tank residue.

Steelgard®1883-4 — Water Soluble Synthetic Rust Preventive

Steelgard®1883-4 is a synthetic water soluble rust preventive concentrate for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It is non-staining to non-ferrous metals such as brass, bronze or copper.

Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Steelgard® 1505-M – Solvent-Based Rust Preventive for Indoor Storage

Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions.

Steelgard® 40-M-1 Base — Barium-Free Rust Prevention Additive

Steelgard® 40-M-1 Base is an indoor rust preventive base for all ferrous surfaces including bearing steels, and tool steels. It is a barium free product. It can be used neat for maximum protection, but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.