Aerotap®15 – Low Viscosity Cutting Oil

Aerotap®15 is a low-viscosity petroleum-based cutting oil specially compounded for medium to heavy duty applications. Aerotap® 15 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes The high degree of chlorination provides Aerotap® 15 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other alloys where high temperatures are encountered.

Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. The added chlorine provides Aerotap® 16-LC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorous. Hamilube® 1955-B is transparent to allow viewing of the work piece during machining. Hamilube® 1955-B contains no active sulfur and is suitable for use with non-ferrous metals.

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme pressure additives to provide long tool life and good finishes. The high sulfur provides Aerotap 15-NC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered. Aerotap 15-NC contains no chlorine to complicate disposal.

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. Aerokut® 749 also contains anti-wear additives to make it suitable as the machine lubricant as well as the cutting oil in screw machines and other applications where co-mingling of the oils cannot be avoided.

Hamilube® X-244-D – Honing Oil

Hamilube® X-244-D is a coolant and lubricant for honing, lapping, grinding and light cutting operations on steel or aluminum. It is a thin-bodied straight oil which provides a media by which a finish can be imparted to a steel surface. It lubricates and keeps stones and metal work pieces clean. It has good heat absorption/transfer properties and doesn’t cause gumming.

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 2078 – Stamping Lubricant

Hamilube® 2078 is a lubricant for stamping, blanking and deep drawing of steel, copper or brass. It is light viscosity oil designed for light to medium grade applications. While it is for use as received, it can be cut back with mineral oil for lighter work. The light film which 2078 deposits provides rust protection to steel parts after processing. Removal of the residue from the metal is accomplished with solvent degreasing, detergent, or alkaline cleaning. Hamilube® 2078-B is an upgraded version of Hamilube® 2078 designed to provide more lubricity and a heavier film thickness

Hamidraw® 9014-LV and 9019 Hydroforming Lubricants

Hamidraw® 9014-LV and 9019 are tube hydroforming lubricants for applications to the outer diameter of parts being formed into dies. Both products are straight petroleum based lubes containing advanced additive packages that are free of sulfur, chlorine, and pigmented compounds. They have excellent forming characteristics and compare very favorably to chlorinated and sulfurized lubes when used on hydroforming operations involving severe metal deformation and elongation. Hamidraw® 9014-LV is a lighter viscosity version of the two products. Hamidraw® 9019 is heavier and possesses better film adherence properties.