Lubricant

December 3, 2018
Kleerkut 4960-LT Test Pin Under 40X Maginification

How Lubricating Coolants Perform Better

About Our Coolant With Lubrication Properties KLEERKUT® 4960-LT is a bio-resistant semi-synthetic coolant capable of performing a wide variety of machining, grinding and stamping operations on […]
August 11, 2016
Medium and Long-Chain Chlorinated and Paraffin-free Cutting Oil

New HD Cutting Oil: Medium and Long-Chain Chlorinated Paraffin Free

Free of Medium or Long-Chain Chlorinated Paraffins Are you trying to avoid long-chain chlorinated paraffins? PE-40-VLC is the newest addition to the Harry Miller line of […]
June 10, 2013

Aerokut® 500-M – Heavy Duty Cutting Oil

Aerokut® 500-M is a viscous petroleum-based cutting oil specifically compounded for medium to heavy-duty applications. Aerokut® 500-M is fortified with chlorinated and sulfurized extreme pressure additives […]
June 10, 2013

Aerokut® 77 – Cutting Oil and Screw Machine Lubricant

Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 […]
February 6, 2013

Kleenlube 68 – Higher Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 68 is a premium quality petroleum-based lubricant specially compounded for machine tool slideways and lathes. Kleenlube 68 contains special extreme pressure additives and tackifiers designed […]
February 6, 2013

Aerokut® 99-SS – Heavy-Duty, Low-Odor Cutting Oil

Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified […]
February 6, 2013

Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 […]
February 6, 2013

Aerogrind® 21 – Medium-Viscosity, Sulfur-Free Cutting Oil

Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to […]
February 6, 2013

Kleenlube 32-B – Lower Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 32-B is a premium quality petroleum-based lubricant specially compounded for primary use as a hydraulic lubricant in machines that require an economical and versatile oil. […]
February 6, 2013

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure […]
February 6, 2013

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no […]
February 4, 2013

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme […]
February 4, 2013

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure […]
January 6, 2012

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.
January 6, 2012

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.
January 6, 2012

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual […]
January 6, 2012

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and […]
January 6, 2012

Hamikut® 9036-HP – Soluble Oil Coolant

Hamikut® 9036-HP is a soluble oil designed for light-to-medium duty applications on a wide variety of materials. It has excellent bioresistance, is low foaming and has […]
December 17, 2010

Kleerkut® 2900 – Low Oil Semi-Synthetic Coolant

Kleerkut® 2900 is a lower oil, heavy duty semi-synthetic lubricant containing extreme pressure additives. It is free of substances subject to reporting requirements of SARA Title […]
December 17, 2010

Hamikleer® X-231-LF – Synthetic Grinding Coolant

Hamikleer® X-231-LF is a synthetic lubricant well suited for roll grinding and Blanchard grinding. It provides solution clarity, bioresistance; low foam, and longevity in recirculating system. […]
November 18, 2010

Hamilube® X-244-D – Honing Oil

Hamilube® X-244-D is a coolant and lubricant for honing, lapping, grinding and light cutting operations on steel or aluminum. It is a thin-bodied straight oil which […]
November 18, 2010

Hamilube® 9200-VP – Cutting Oil

Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube […]
November 18, 2010

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, […]
November 18, 2010

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, […]