Hamico® 178

Hamico® 178 is a liquid rust remover designed to dissolve rust on contact. Hamico® 178 is used full strength and can be applied by brushing or dipping or spray application with an airless sprayer. The time required for rust removal is dependent upon the degree of rust present. Blush rust is removed in a few minutes, whereas, heavy rust will require longer times and, perhaps, repeated rinsing and application. Removal of Hamico® 178 is easily accomplished by a water rinse.

Immunol® 791-J – Mild Cleaner and Rust Inhibitor

Immunol® 791-J is an ultrasonic test tank additive that will dissolve instantly in any kind of water to make a clear, thin solution. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals, but is not recommended for use on aluminum, copper or brass. Immunol® 791-J protects cast iron and ferrous metals submerged in its solution indefinitely and forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Immunol® 791-J will not cloud in solutions of water at temperatures up to 210 (F) and will not gum or decompose when circulated in water.

Hamiterge® 1930 – Solvent Cleaner for Ink and Glue

Hamiterge® 1930 is an extremely light colored, non-aqueous, transparent cleaning solvent used in many applications for removal of oils, greases, mill soils, adhesive residues, etc. as well as layout and marker lines. Hamiterge® 1930 can be used on all metals, as received, by dip, spray or wipe or cut with 1 part water. Hamiterge® 1930 will evaporate rapidly and completely leaving surfaces clean and dry.

Immunol® S-6-I – Aluminum Detergent Cleaner

Immunol® S-6-I can be used for all general cleaning and degreasing of ferrous and non-ferrous parts and equipment replacing flammable, toxic solvents and alkaline cleaners. Immunol® S-6-I emulsifies oils, mill soils and provides mild indoor rust protection in one operation. used in steel mills, metalworking plants, paper and textile mills as a “general purpose” solvent cleaner. widely used in tumbling and as a “bucket” solvent. Immunol® S-6-I is used as an additive for vibratory deburring or finishing and is inhibited for protection to aluminum.

Hamiterge® 8407 – Bright Dip for Yellow Metals

Hamiterge® 8407 is a liquid detergent immersion cleaner or bright dip designed for removal of oxides from yellow metals such as copper, brass or bronze. Hamiterge® 8407 provides an easy way to brighten metals in a relatively non-hazardous media.

Hamiterge® 1934 – Emulsion Spray Cleaner

Hamiterge® 1934 is a liquid emulsion spray cleaner for removal of oily films, metallic chips and fines, shop or mill dirt, and lube oil residues from steel and aluminum surfaces. It is designed for usage in single or multi stage power spray washers or roto-brush type washers at elevated or ambient temperature conditions. Hamiterge 1934-RP is the version with enhanced rust preventive properties.

Hamiterge® 711-5-LF – Alkaline Spray Cleaner

Hamiterge® 711-5-LF is a powdered alkaline cleaner designed for spray cleaning of mill soils from steel surfaces. Hamiterge® 711-5-LF can be used on aluminum, copper and brass as well.

Hamiterge® 8904 – Alkaline Spray Cleaner

Hamiterge® 8904 is a concentrated liquid alkaline spray cleaner for removal of oily films, metallic chips and fines, shop or mill dirt, and lube oil residues from steel and aluminum surfaces. Hamiterge® 8904 is designed for use in single or multi stage power spray washers or roto-brush type washers at elevated or ambient temperature conditions. Hamiterge® 8904 can be diluted with hot or cold water, is low foaming, and free rinsing. Hamiterge® 8904 will not form insoluble residues in hard water and has good oil rejection properties, making it suitable for recirculating systems. Hamiterge® 8904 provides mild rust protection to steel, and it is non-staining to aluminum.

Purgitol® TMB – Sump Cleaner

Purgitol® TMB is used as a sump cleaner and/or additive to soluble oil (or synthetic coolant) systems in machine shops as an emulsifier of “tramp” oils and a system cleaner. Purgitol® TMB loosens sludge and metallic buildup in lines, settles heavy particles, and kills bacteria and fungus while it protects against stains and rust on ground or polished surfaces. Purgitol® TMB can be used on steel, cast and malleable iron, and on non-ferrous metals, however, a darkening of aluminum will occur upon prolonged contact.

Immunol® S-6 – Cleaner and Degreaser

Immunol® S-6 is used for all general cleaning and degreasing of ferrous and non-ferrous parts and equipment replacing flammable, toxic solvents and alkaline cleaners. Immunol® S-6 emulsifies oils, mill soils and provides mild indoor rust protection in one operation. Immunol® S-6 is used in steel mills, metalworking plants, paper and textile mills as a “general purpose” solvent cleaner and is widely used in tumbling and as a “bucket” solvent. Immunol® S-6 may also used as additive for vibratory deburring or finishing. (Use Immunol S-6-I grade for additional aluminum protection.)