Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and its alloys.

Hamikut® 9036-HP – Soluble Oil Coolant

Hamikut® 9036-HP is a soluble oil designed for light-to-medium duty applications on a wide variety of materials. It has excellent bioresistance, is low foaming and has more reserve alkalinity for longer pH stability and better rust protection.

Hamikleer® X-231-LF – Synthetic Grinding Coolant

Hamikleer® X-231-LF is a synthetic lubricant well suited for roll grinding and Blanchard grinding. It provides solution clarity, bioresistance; low foam, and longevity in recirculating system. The use dilution is 2-5% in water.

Hamilube® X-244-D – Honing Oil

Hamilube® X-244-D is a coolant and lubricant for honing, lapping, grinding and light cutting operations on steel or aluminum. It is a thin-bodied straight oil which provides a media by which a finish can be imparted to a steel surface. It lubricates and keeps stones and metal work pieces clean. It has good heat absorption/transfer properties and doesn’t cause gumming.

Hamilube® 9200-VP – Cutting Oil

Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube containing an advanced additive package that is free of sulfur, chlorine, and pigmented compounds. It has excellent lubrication characteristics that compares very favorably to chlorinated and sulfurized lubes. While it is designed for use neat, as received, it can be cut back with mineral oil or solvents for lighter work. Removal of the residue from the metal can be performed with solvent degreasing, detergent, or alkaline cleaning.

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.