Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. The added chlorine provides Aerotap® 16-LC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.

Aerogrind® 21 – Medium-Viscosity, Sulfur-Free Cutting Oil

Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes. The high degree of chlorine provides Aerogrind® 21 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other hard alloys where high temperatures are encountered.

Kleenlube 32-B – Lower Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 32-B is a premium quality petroleum-based lubricant specially compounded for primary use as a hydraulic lubricant in machines that require an economical and versatile oil. It can also lubricate machine tool slideways and lathes. Kleen Lube 32-B contains special additives designed to provide easy start-up, smooth travel, with stick-slip and chatter elimination. Anti-wear and inhibitor additives provide enhanced service life and corrosion protection. Kleenlube 32-B does not contain chlorinated additives which can complicate waste characterization and disposal. Kleenlube 32-B is also specially formulated to resist oxidation and viscosity changes. 

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure additives and synthetic sulfurized additives, along with synthetic anti-wear components, to provide exceptional die life and part finish, and cleaner tools and dies. The high viscosity of PE-50 provides high film strength, even at high temperatures to carry through multiple stages with a single application. Because of the high concentration of extreme pressure agents, PE-50 is also used in coining, extrusion, and other occasional heavy-duty work.

Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorous. Hamilube® 1955-B is transparent to allow viewing of the work piece during machining. Hamilube® 1955-B contains no active sulfur and is suitable for use with non-ferrous metals.

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme pressure additives to provide long tool life and good finishes. The high sulfur provides Aerotap 15-NC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered. Aerotap 15-NC contains no chlorine to complicate disposal.

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. Aerokut® 749 also contains anti-wear additives to make it suitable as the machine lubricant as well as the cutting oil in screw machines and other applications where co-mingling of the oils cannot be avoided.

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.