Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme pressure additives to provide long tool life and good finishes. The high sulfur provides Aerotap 15-NC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered. Aerotap 15-NC contains no chlorine to complicate disposal.

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. Aerokut® 749 also contains anti-wear additives to make it suitable as the machine lubricant as well as the cutting oil in screw machines and other applications where co-mingling of the oils cannot be avoided.

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and its alloys.

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 5705 – Cutting Oil

Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals.

Hamilube® 1955-A – Cutting Oil

Hamilube® 1955-A is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorus. It is transparent to allow viewing of the work piece during machining. It is not suitable for use with non-ferrous metals. It contains active sulfur and is non-staining on steel.