Hamico® 8936 – Rinse Aid

Hamico® 8936 Rinse Aid is an additive for rinse systems after pickling steel using hydrochloric or sulfuric acids. Hamico® 8936 Rinse Aid prevents the formation of iron hydroxide slimes which typically occur in rinse tanks and prevents surface discoloration on steel exiting the bath. Hamico® 8936 Rinse Aid complexes ferrous iron, thus preventing it from re-depositing.

Hamico® 8936 Rinse Aid buffers the rinse water against sudden drops in pH, due to acid carryover from pickling tanks and protects from flash rusting after rinse operations. It may be used in hot or cold baths.

Hamico® 8936 Rinse Aid is easy to handle and is not corrosive to the skin.

Hamico® 8934 – Rinse Aid

Hamico® 8934 Rinse Aid is a stain preventing additive for rinse systems for use after hydrochloric or sulfuric acid pickling operations. It is an acidic product possessing corrosion protection and wetting. It is designed to eliminate the brown or reddish stains often experienced on steel exiting a continuous pickler. It eliminates the formation of iron hydroxide slimes which accumulate in rinse tanks as a result of acid bath carryover. Hamico® 8934 Rinse Aid is compatible with waste treatment processes where removal of metals like iron, copper, zinc, and chromium must be accomplished to meet limits for effluents.

This product prevents carryover products from depositing on the immersed steel surface and protects the rinsed surface before drying occurs. Hamico® 8934 Rinse Aid is low-foaming to make water treatment and disposal easier and employs a tracer to make it easy to make concentration determinations using a test kit.

Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Aerokut® 500-M – Heavy Duty Cutting Oil

Aerokut® 500-M is a viscous petroleum-based cutting oil specifically compounded for medium to heavy-duty applications. Aerokut® 500-M is fortified with chlorinated and sulfurized extreme pressure additives as well as a special high-performance “moly” lubricant to provide long tool life and good finishes. The high degree of chlorination provides Aerokut® 500-M with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.

Hamidraw® 1945-300 Heavy Duty Stamping and Drawing Lubricant

Hamidraw® 1945-300 is a heavy-duty stamping, blanking, and drawing lubricant for all metals. Hamidraw® 1945-300 has a viscosity of SUS 300 at 100 F. It contains extreme pressure additives to assist in difficult stamping application. 

Aerokut® 77 – Cutting Oil and Screw Machine Lubricant

Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 is fortified with chlorinated and special sulfurized extreme pressure additives designed to provide both high and low temperature extreme pressure lubrication without any staining of copper based alloys. Aerokut® 77 is ideal for machines which suffer from excessive cross-contamination which would otherwise reduce machine efficiency.

Aerotap®15 – Low Viscosity Cutting Oil

Aerotap®15 is a low-viscosity petroleum-based cutting oil specially compounded for medium to heavy duty applications. Aerotap® 15 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes The high degree of chlorination provides Aerotap® 15 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other alloys where high temperatures are encountered.

Kleenlube 68 – Higher Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 68 is a premium quality petroleum-based lubricant specially compounded for machine tool slideways and lathes. Kleenlube 68 contains special extreme pressure additives and tackifiers designed to provide easy start-up, smooth travel and stick-slip and chatter elimination. Anti-Wear and inhibitor additives provide enhanced service life and corrosion protection. Kleenlube 68 does not contain chlorinated additives which can complicate waste characterization and disposal. Kleenlube 68 is also specially formulated to resist oxidation and viscosity changes so it can also be used as a hydraulic lubricant in machines that require an economical, versatile oil.

Aerokut® 99-SS – Heavy-Duty, Low-Odor Cutting Oil

Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. It has very high anti-weld and lubricity properties, and the low viscosity helps to dissipate heat and flush chips from the work area. The light color, transparent, and low-odor oil improves workpiece visibility.

Aerotap® 16-LC – Low Odor Cutting Oil

Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. The added chlorine provides Aerotap® 16-LC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered.