Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Hamidraw® 1945-300 Heavy Duty Stamping and Drawing Lubricant

Hamidraw® 1945-300 is a heavy-duty stamping, blanking, and drawing lubricant for all metals. Hamidraw® 1945-300 has a viscosity of SUS 300 at 100 F. It contains extreme pressure additives to assist in difficult stamping application. 

Kleenlube 68 – Higher Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 68 is a premium quality petroleum-based lubricant specially compounded for machine tool slideways and lathes. Kleenlube 68 contains special extreme pressure additives and tackifiers designed to provide easy start-up, smooth travel and stick-slip and chatter elimination. Anti-Wear and inhibitor additives provide enhanced service life and corrosion protection. Kleenlube 68 does not contain chlorinated additives which can complicate waste characterization and disposal. Kleenlube 68 is also specially formulated to resist oxidation and viscosity changes so it can also be used as a hydraulic lubricant in machines that require an economical, versatile oil.

Aerogrind® 21 – Medium-Viscosity, Sulfur-Free Cutting Oil

Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to provide long tool life and good finishes. The high degree of chlorine provides Aerogrind® 21 with the extreme pressure lubrication necessary for use on stainless steel, titanium and other hard alloys where high temperatures are encountered.

Kleenlube 32-B – Lower Viscosity Premium Hydraulic and Way Lubricant

Kleenlube 32-B is a premium quality petroleum-based lubricant specially compounded for primary use as a hydraulic lubricant in machines that require an economical and versatile oil. It can also lubricate machine tool slideways and lathes. Kleen Lube 32-B contains special additives designed to provide easy start-up, smooth travel, with stick-slip and chatter elimination. Anti-wear and inhibitor additives provide enhanced service life and corrosion protection. Kleenlube 32-B does not contain chlorinated additives which can complicate waste characterization and disposal. Kleenlube 32-B is also specially formulated to resist oxidation and viscosity changes. 

PE-50 – Heavy Duty Straight Oil

PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure additives and synthetic sulfurized additives, along with synthetic anti-wear components, to provide exceptional die life and part finish, and cleaner tools and dies. The high viscosity of PE-50 provides high film strength, even at high temperatures to carry through multiple stages with a single application. Because of the high concentration of extreme pressure agents, PE-50 is also used in coining, extrusion, and other occasional heavy-duty work.

Hamikleer® 1975-RP – Synthetic Coolant

Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.

Hamikleer® 1975-XS – Synthetic Coolant

Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.

Hamikleer® 1975 – Synthetic Coolant

Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual film to keep machine parts moving and has excellent wetting properties to allow swarf and fines to settle in the sump and not deposit on machinery.

Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.