Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Hamikleer® 712 and 712-2 – Synthetic Couplants

Hamikleer® 712 and 712-2 are water soluble synthetic couplants for ultrasonic testing replacing glycerine. The buffering action of this Hamikleer® 712 series permits testing of many metals and metallic couples that typically corrode in aqueous-phase couplants. The low halogen content makes the Hamikleer® 712 series the ideal material to use on titanium and other space-age metals, where possible halogen stress corrosion could be a problem. The exceptional water solubility and solution clarity of the Hamikleer® 712 series allows easier rigging and positioning in submerged tank testing. There are several viscosity grades for this product, contact us for a version formulated to meet your specific needs.

Immunol® 1809-J – Ultrasonic NDT Additive

Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications.

Immunol® 1228 – NDT Additive

Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage.

Hamisonic® X-289 and X-290 – Ultrasonice NDT Fluid

Hamisonic® X-289 and X-290 are ultrasonic couplants for contact testing on horizontal or vertical surfaces. X-289 is a light viscosity material and X-290 is a heavier viscosity material. These materials can be brushed on the test surface and left on or removed with a water wash. It is a more economical set of couplants; dries to a film having minimal residue.

Hamikleer® 8307-A and 8307-B

Hamikleer® 8307-A and 8307-B are water soluble synthetic couplants for contact ultrasonic testing replacing glycerin. They are chemically pure couplants that contain little or no contamination, which makes them acceptable for the testing requirements of turbine blade manufacturers. They are more highly pure compounds than the Hamikleer® 712 series of couplants.

Hamikleer® High Viscosity U.T. Couplants

Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals: Hamikleer® 712-HV-1 Viscosity – 38,000 – 45,000 cps @ 720F Hamikleer® 712-HV-2 Viscosity – 27,000 – 33,000 cps@ 720F Hamikleer® 712-HV-3 Viscosity – 5,000 – 8,000 cps @ 720F