Hamilube® 1955-B – Chlorine-Free Straight Oil

Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorous. Hamilube® 1955-B is transparent to allow viewing of the work piece during machining. Hamilube® 1955-B contains no active sulfur and is suitable for use with non-ferrous metals.

Aerotap 15-NC – Low Viscosity Cutting Oil

Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium  duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme pressure additives to provide long tool life and good finishes. The high sulfur provides Aerotap 15-NC with the extreme pressure lubrication necessary for use on stainless steel, titanium, and other hard alloys where high temperatures are encountered. Aerotap 15-NC contains no chlorine to complicate disposal.

Aerokut® 749 – Cutting Oil and Machine Lubricant

Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure additives to provide long tool life and good finishes. Aerokut® 749 also contains anti-wear additives to make it suitable as the machine lubricant as well as the cutting oil in screw machines and other applications where co-mingling of the oils cannot be avoided.

Rainkote® 75 – Soluble Oil Rust Preventive

Rainkote® 75 is an emulsifiable oil-based rust preventive. The resulting thin oily film provides indoor protection of steel, cast iron, or galvanized surfaces for up to 6 months. Rainkote® 75 can be used in spray or immersion applications.

Rainkote® 110 – Oil-Solvent Rust Preventive

Rainkote® 110 is an oil/solvent based rust preventive used for the protection of steel or cast iron parts during indoor storage for a period of up to one year. The oily film deposited by Rainkote 110 is self healing and lubricating making it ideal for the storage of parts prior to assembly.

Steelgard® 8920-K — Rust Prevention for Acidic Environments

Steelgard® 8920-K is an indoor rust preventive for steel stored in an acidic atmosphere such as a pickling department. It is designed primarily for protection against hydrochloric (muriatic) acid vapors. It deposits an oily film and is a very low odor product. It protects against staining and contact corrosion in tightly wrapped steel coils.

Steelgard® 8703-AT — Long Term Indoor Storage Protection

Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness.

Steelgard® 2005 — Temper Mill Lubricant

Steelgard® 2005 is a new innovation for use as a temper mill fluid for coated products replacing straight oils, solvents or the practice of dry tempering. In addition to preventing white rust, it produces a better “healed-over” surface, reduces roll pick-up, permits higher mill speed and achieves elongations with lower roll force.

Steelgard® 1938-K-1 — Oil Based Rust Prevention for Indoor Storage

Steelgard® 1938-K-1 is an oil based rust preventive for steel, iron or non-ferrous metals protection under normal indoor storage conditions. It provides 6 to 12 months protection in a normal warehouse storage environment.

Steelgard® 1926-BW — Soluble Oil Rust Preventive

Steelgard® 1926-BW is a soluble oil rust preventive for steel and non-ferrous metals for indoor storage protection of up to 6 months. It maintains excellent stability, even if contaminated by pickle tank residue.