Hamico® 8936 – Rinse Aid

Hamico® 8936 Rinse Aid is an additive for rinse systems after pickling steel using hydrochloric or sulfuric acids. Hamico® 8936 Rinse Aid prevents the formation of iron hydroxide slimes which typically occur in rinse tanks and prevents surface discoloration on steel exiting the bath. Hamico® 8936 Rinse Aid complexes ferrous iron, thus preventing it from re-depositing.

Hamico® 8936 Rinse Aid buffers the rinse water against sudden drops in pH, due to acid carryover from pickling tanks and protects from flash rusting after rinse operations. It may be used in hot or cold baths.

Hamico® 8936 Rinse Aid is easy to handle and is not corrosive to the skin.

Hamico® 8934 – Rinse Aid

Hamico® 8934 Rinse Aid is a stain preventing additive for rinse systems for use after hydrochloric or sulfuric acid pickling operations. It is an acidic product possessing corrosion protection and wetting. It is designed to eliminate the brown or reddish stains often experienced on steel exiting a continuous pickler. It eliminates the formation of iron hydroxide slimes which accumulate in rinse tanks as a result of acid bath carryover. Hamico® 8934 Rinse Aid is compatible with waste treatment processes where removal of metals like iron, copper, zinc, and chromium must be accomplished to meet limits for effluents.

This product prevents carryover products from depositing on the immersed steel surface and protects the rinsed surface before drying occurs. Hamico® 8934 Rinse Aid is low-foaming to make water treatment and disposal easier and employs a tracer to make it easy to make concentration determinations using a test kit.

Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Rainkote® 75 – Soluble Oil Rust Preventive

Rainkote® 75 is an emulsifiable oil-based rust preventive. The resulting thin oily film provides indoor protection of steel, cast iron, or galvanized surfaces for up to 6 months. Rainkote® 75 can be used in spray or immersion applications.

Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.

Kleerkut® 4900-HD – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-HD has an enhanced, upweighted synthetic lubricant package, compared to Kleerkut 4900, for heavier duty applications. This product is chlorine-free.

Kleerkut® 4900-HP – Medium Duty Coolant

Kleerkut® 4900-HP is a lower oil version of 4900 designed for light-to-medium duty applications. This product has more reserve alkalinity to enhance pH stability and provide superior emulsion stability.

Hamikut® 9036-HP – Soluble Oil Coolant

Hamikut® 9036-HP is a soluble oil designed for light-to-medium duty applications on a wide variety of materials. It has excellent bioresistance, is low foaming and has more reserve alkalinity for longer pH stability and better rust protection.

Kleerkut® 4960 – Semi-Synthetic Coolant for Aluminum

Kleerkut® 4960 performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals and offers significantly upgraded lubrication properties for aluminum machining operations, as well as better heavy duty lubrication on steel.

Kleerkut® 4960 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming, easy to clean using filtration or centrifuge, and long lasting.

Immunol® 1392-J – Water Soluble Rust Preventive

Immunol® 1392-J is odorless and dissolves instantly in any kind of water (even the very hardest) to make a clear, thin solution. Immunol® 1392-J has a slightly alkaline pH of 9.0 and is a detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. Immunol® 1392-J protects cast iron and ferrous metals submerged in its solutions for months and forms invisible, quick drying, protective coatings on metal, which insure maximum “indoor” protection. Deposited coatings of Immunol® 1392-J are water soluble and, therefore, will not show to advantage in humidity cabinet tests, due to condensation and the ease of washing the product off with plain water. Immunol® 1392-J will not cloud in water and will not gum or decompose when circulated in water. Immunol® 1392-J has exceptional power of heat absorption and convection. Immunol® 1392-J is not recommended for use on aluminum, copper or brass.