Immunol® S-6-H – Detergent Immersion Cleaner

Immunol® S-6-H is a detergent type cleaner for soak tank cleaning and degreasing of ferrous and non-ferrous parts. It emulsifies oils such as drawing compounds and rust preventives, and removes mill soils and smut very effectively. It may also be used for general purpose cleaning as a “bucket” solvent to replace more flammable or toxic materials. If used on aluminum, extended immersion times (one hour or more) produce darkening. Use Immunol® S-6-I as an alternative for aluminum.

Immunol ® Extra-J – Wetting Agent and Cleaner

Immunol ® Extra-J a detergent, wetting agent and rust preventive for cleaning and protecting most ferrous metals against rust. Not suitable for use on cast iron and cast steel. Replaces Immunol® Extra and contains no nitrosamines.

Immunol® 1228 – NDT Additive

Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage.

Immunol® 985-J – Detergent Spray Cleaner

Immunol® 985-J is a low foaming detergent spray cleaner for metal surfaces. It contains rust preventives which protect ferrous metals after cleaning for short periods indoors. It is a completely nitrite free product. It removes mineral and fatty mill soils completely without saponification; therefore, it is not spent in use.

Immunol® 438-X – Nitrate Free NDT Additive

Immunol® 438-X is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. It is also an additive to hydrostatic test solutions. It provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces.

Aquatemp® 8304-WT – Cleaner and Rust Preventative

Aquatemp® 8304-WT is a new synthetic chemical mill cleaner/rust preventive combination providing maximum “dry finish” rust protection. It is used where no reduction is required or desired as in “skin passing,” or “wet tempering.” It can be applied in conventional ways via spray headers at the entry side of the mill or with an air wipe on the delivery side.

Steelgard® 9060 — Rust Prevention for Outdoor Storage

Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. It is a ready to use product straight from the container and dries to a dry, transparent film that will not re-emulsify when exposed to moisture in the air. Steelgard® 9060 will provide excellent protection to metals under indoor or covered outdoor conditions. This product is particularly helpful where the need to reduce VOC emission levels is critical.