Rainkote® 110 – Oil-Solvent Rust Preventive

Rainkote® 110 is an oil/solvent based rust preventive used for the protection of steel or cast iron parts during indoor storage for a period of up to one year. The oily film deposited by Rainkote 110 is self healing and lubricating making it ideal for the storage of parts prior to assembly.

Steelgard® X-267-B – Long-term Outdoor Storage Rust Prevention

Steelgard® X-267-B is a long term, outdoor rust preventive that can be used on ferrous or non-ferrous metals, in uncovered or covered storage conditions. It protects tools, stampings, forgings, castings, machinery, tubing or any metal parts that need a waxy, plastic, non-tacky film. It protects overseas and domestic shipments.

Steelgard® 8703-AT — Long Term Indoor Storage Protection

Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness.

Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Steelgard® 1505-M – Solvent-Based Rust Preventive for Indoor Storage

Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions.

Steelgard® 1505-B – Solvent-Based Rust Preventive

Steelgard® 1505-B is designed for medium-term, thin film corrosion protection for ferrous and non-ferrous surfaces. It displaces moisture and leaves a thin, clear, non-staining film that dries to the touch in three hours. It is readily removed by mineral spirits or mild alkali washes.

Hamico® 138-L

Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing.

Aquatemp® 1860-LV-2 – Temper Mill Lubricant

Aquatemp® 1860-LV-2 is a low viscosity temper mill lubricant for application on coated products during tempering or “skin pass” processes. It cleans the mill and strip, reduces roll pickup, permits higher mill speeds than dry tempering operation and provides lubrication to achieve required elongations. It is a solvent based product which evaporates after processing and can be coated with petroleum based coating oils.