Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Hamikleer® 712 and 712-2 – Synthetic Couplants

Hamikleer® 712 and 712-2 are water soluble synthetic couplants for ultrasonic testing replacing glycerine. The buffering action of this Hamikleer® 712 series permits testing of many metals and metallic couples that typically corrode in aqueous-phase couplants. The low halogen content makes the Hamikleer® 712 series the ideal material to use on titanium and other space-age metals, where possible halogen stress corrosion could be a problem. The exceptional water solubility and solution clarity of the Hamikleer® 712 series allows easier rigging and positioning in submerged tank testing. There are several viscosity grades for this product, contact us for a version formulated to meet your specific needs.

Immunol® 1228 – NDT Additive

Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage.

Immunol® 438-X – Nitrate Free NDT Additive

Immunol® 438-X is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. It is also an additive to hydrostatic test solutions. It provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces.

Hamisonic® X-289 and X-290 – Ultrasonice NDT Fluid

Hamisonic® X-289 and X-290 are ultrasonic couplants for contact testing on horizontal or vertical surfaces. X-289 is a light viscosity material and X-290 is a heavier viscosity material. These materials can be brushed on the test surface and left on or removed with a water wash. It is a more economical set of couplants; dries to a film having minimal residue.

Hamisolve® 622 – Solvent Cleaner

Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry.

Hamilube® 1328-N – Cutting Oil

Hamilube® 1328-N contains no chlorinated compounds and only minimal amounts of sulfur and phosphorus. It has a light viscosity to flush away metal chips and provide efficient heat removal from the work and tooling. It is suitable for machining operations such as trepanning, threading, tapping, turning, milling and drilling of steel.

Hamikleer® High Viscosity U.T. Couplants

Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals: Hamikleer® 712-HV-1 Viscosity – 38,000 – 45,000 cps @ 720F Hamikleer® 712-HV-2 Viscosity – 27,000 – 33,000 cps@ 720F Hamikleer® 712-HV-3 Viscosity – 5,000 – 8,000 cps @ 720F

Hamico® EDM – EDM Oil

Hamico® EDM is a light colored, transparent, odorless oil for use as the dielectric fluid in EDM (electric discharge machining) operations. It is an extraordinarily pure lubricant with many performance benefits which make it a clear choice as a superior EDM fluid. These benefits include: exceptionally high dielectric strength and clarity, extremely low toxicity, low volatility, outstanding oxidative and thermal stability, low aromatic content, and excellent separation from water.

Activol® 9012 – Sulfamic Acid Inhibitor

Activol® 9012 is a powdered inhibitor for use in pickling operations using sulfamic acid. It imparts maximum inhibiting properties to sulfamic acid solutions reacting on steel. Use at 1-2% of the sulfamic acid weight in pickling baths, for reducing metal loss, fume prevention and reduction of hydrogen embrittlement. This product is also used to clean boilers or other steam generation equipment where sulfamic acid is utilized.