Steelgard® 2005 — Temper Mill Lubricant

Steelgard® 2005 is a new innovation for use as a temper mill fluid for coated products replacing straight oils, solvents or the practice of dry tempering. In addition to preventing white rust, it produces a better “healed-over” surface, reduces roll pick-up, permits higher mill speed and achieves elongations with lower roll force.

Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Steelgard® 1505-M – Solvent-Based Rust Preventive for Indoor Storage

Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions.

Steelgard® 1505-B – Solvent-Based Rust Preventive

Steelgard® 1505-B is designed for medium-term, thin film corrosion protection for ferrous and non-ferrous surfaces. It displaces moisture and leaves a thin, clear, non-staining film that dries to the touch in three hours. It is readily removed by mineral spirits or mild alkali washes.

Steelgard® 1302-J – Synthetic Rust Preventive

Steelgard® 1302-J is for rust protection of all ferrous metals, including cast and malleable iron. It is ideal for spray washer application for mild cleaning and rust protection.

Steelgard® 20-M-1 Base — Rust Prevention Additive

Steelgard® 20-M-1 Base is a long term indoor rust preventive base for all ferrous surfaces including bearings type and tool steels. Offering excellent non-staining property on stainless or alloys, it can be used in neat form for maximum protection but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.

Purgitol® S-8 – Heavy-Duty Spray Cleaner

Purgitol® S-8 is a concentrated liquid cleaner for rolling oil and other mill soil removal from steel strip by application through spray headers at the last stand on a four or five stand cold reducing tandem mill. Purgitol® S-8 may also be used as a water soluble straightener lubricant for wire or rods on roll straightener equipment. It has excellent corrosion protection, boundary lubrication and is low foaming (for recirculating sprays).

Purgitol® S – Heavy-Duty Cleaner

Purgitol® S is the answer for machine shops seeking to replace toxic, odorous, irritating solvents in their immersion cleaning operations. Purgitol® S cleans machining and drawing oils and lubricants, yet it contains no flammable or toxic ingredients.

Immunol® 985-J – Detergent Spray Cleaner

Immunol® 985-J is a low foaming detergent spray cleaner for metal surfaces. It contains rust preventives which protect ferrous metals after cleaning for short periods indoors. It is a completely nitrite free product. It removes mineral and fatty mill soils completely without saponification; therefore, it is not spent in use.

Hamiterge® 8922 – Liquid Alkaline Spray Cleaner

Hamiterge® 8922 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, drawing and stamping lubricants, rust preventives, metallic chips and fines, and other oily soils, shop or mill dirt from steel strip, wire, rod and bars. It is designed for use in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperatures in dilutions with water. It is low foaming, completely biodegradable, and free rinsing. It will not buildup hard water deposits and contains no phosphates.