Hamidraw® 1945-300 Heavy Duty Stamping and Drawing Lubricant

Hamidraw® 1945-300 is a heavy-duty stamping, blanking, and drawing lubricant for all metals. Hamidraw® 1945-300 has a viscosity of SUS 300 at 100 F. It contains extreme pressure additives to assist in difficult stamping application. 

Hamilube® 2078 – Stamping Lubricant

Hamilube® 2078 is a lubricant for stamping, blanking and deep drawing of steel, copper or brass. It is light viscosity oil designed for light to medium grade applications. While it is for use as received, it can be cut back with mineral oil for lighter work. The light film which 2078 deposits provides rust protection to steel parts after processing. Removal of the residue from the metal is accomplished with solvent degreasing, detergent, or alkaline cleaning. Hamilube® 2078-B is an upgraded version of Hamilube® 2078 designed to provide more lubricity and a heavier film thickness

Hamilube® 1989 – Synthetic Drawing Lubricant

Hamilube® 1989 is a specially formulated synthetic lubricant for use in metal forming operations on aluminum and other non-ferrous metals, such as cooper or brass. It is recommended for drawing, stamping, blanking and cutting as a replacement for petroleum based straight oils. It contains no oil, sulfur, or chlorine. It provides excellent high film strength boundary lubrication, leaves no residue upon burnoff in an anneal, and is easily removed. Hamilube®1989-B is a lower viscosity version of Hamilube® 1989.

Hamicote® D-20-NL – Forging Lubricant

Hamicote® D-20-NL (and variations) are used for die casting, press forging, drop forging, upset forging, extruding lubricant, mold lubricant, drawing, stamping, preventing rust and white rust. Delivered at 100% concentration, and composed of extreme pressure lubricants and metallic soap, this product can be used neat or can be diluted. It disperses in plain water (in any ratio of dilution) to form a uniform, white, stable emulsion with a faintly alkaline pH of 8.0 and is completely soluble in stoddard solvent, kerosene or mineral oils. Is a rust preventive for ferrous metals and prevents white rust on galvanized surfaces. The product is an outstanding lubricant for metal surfaces at normal or elevated temperatures. The metallic component remains on hot surfaces up to 3000 F and can be applied in emulsion form adding to plain water at room or elevated temperatures. This product line offers exceptional performance and contains no silicones, manganese, copper, graphite or suspended matter.

Hamico® 142

Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light gauge steel, stainless steel, brass, and aluminum. This product’s evaporation rate is faster than that of Hamico® 138-L.

Hamico® 138-L

Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing.

Hamidraw® 1945 Series Stamping Lubricants

Hamidraw® 1945 Series is a lubricant for stamping, blanking, and deep drawing of all metals. It is a heavy duty oil and can be cut back with mineral oil for lighter work. Removal from the metal can be done with solvents or alkaline cleaners. Hamidraw® 1945 is offered in viscosity grades from 100 SUS to 700 SUS.

Aquaroll® 7606-FO – Cold Rolling Lubricant

Aquaroll® 7606-FO is an emulsifiable cold rolling lubricant for steel, copper and brass. It is applicable for use in grade rolling of blanks in tableware manufacture. It is non-staining to rolls and work, contains little ash, is long lasting and low foaming.

Aqualube® 2029 – Synthetic Stamping Lubricant

Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel

Aqualube® 2023 FR – Synthetic Stamping Lubricant

Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film.