Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Steelgard® 1505-M – Solvent-Based Rust Preventive for Indoor Storage

Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions.

Steelgard® 1505-B – Solvent-Based Rust Preventive

Steelgard® 1505-B is designed for medium-term, thin film corrosion protection for ferrous and non-ferrous surfaces. It displaces moisture and leaves a thin, clear, non-staining film that dries to the touch in three hours. It is readily removed by mineral spirits or mild alkali washes.

Steelgard® 1302-J – Synthetic Rust Preventive

Steelgard® 1302-J is for rust protection of all ferrous metals, including cast and malleable iron. It is ideal for spray washer application for mild cleaning and rust protection.

Steelgard® 535-RP — Corrosion Prevention for Brass, Copper, Bronze

Steelgard® 535-RP is a soluble oil, containing an improved rust protection package, for prevention of tarnish and/or corrosion on copper, brass and bronze, as well as on ferrous surfaces. It protects against corrosion to steel for up to 6 months of indoor storage under normal plant humidity conditions when applied at 1:10 in water.

Steelgard® 40-M-1 Base — Barium-Free Rust Prevention Additive

Steelgard® 40-M-1 Base is an indoor rust preventive base for all ferrous surfaces including bearing steels, and tool steels. It is a barium free product. It can be used neat for maximum protection, but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.

Steelgard® 20-M-1 Base — Rust Prevention Additive

Steelgard® 20-M-1 Base is a long term indoor rust preventive base for all ferrous surfaces including bearings type and tool steels. Offering excellent non-staining property on stainless or alloys, it can be used in neat form for maximum protection but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles.

Steelgard® 9060 — Rust Prevention for Outdoor Storage

Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. It is a ready to use product straight from the container and dries to a dry, transparent film that will not re-emulsify when exposed to moisture in the air. Steelgard® 9060 will provide excellent protection to metals under indoor or covered outdoor conditions. This product is particularly helpful where the need to reduce VOC emission levels is critical.