Tapping
June 10, 2013
Aerokut® 500-M is a viscous petroleum-based cutting oil specifically compounded for medium to heavy-duty applications. Aerokut® 500-M is fortified with chlorinated and sulfurized extreme pressure additives […]
Do you like it?
June 10, 2013
Aerokut® 77 is a petroleum-based cutting oil specially compounded for use as both an internal lubricant for screw machines and as the machining lubricant. Aerokut® 77 […]
Do you like it?
June 10, 2013
Aerotap®15 is a low-viscosity petroleum-based cutting oil specially compounded for medium to heavy duty applications. Aerotap® 15 is fortified with chlorinated extreme pressure additives to provide […]
Do you like it?
February 6, 2013
Aerokut® 99-SS is a petroleum-based cutting oil specially compounded for medium to heavy-duty applications, including broaching, tapping, threading and shearing difficult-to-machine metals. Aerokut® 99-SS is fortified […]
Do you like it?
February 6, 2013
Aerotap® 16-LC is a low viscosity petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerotap® 16-LC is a light-colored, low-odor version of Aerotap® 15 […]
Do you like it?
February 6, 2013
Aerogrind® 21 is a medium-viscosity, sulfur-free, petroleum-based cutting oil specially compounded for medium to heavy-duty applications. Aerogrind® 21 is fortified with chlorinated extreme pressure additives to […]
Do you like it?
February 6, 2013
PE-50 is a heavy-duty cutting oil designed for heavy-gauge carbon steel. It is an upgraded version of PE-36N, containing a high concentration of chlorinated extreme pressure […]
Do you like it?
February 6, 2013
Hamilube® 1955-B is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no […]
Do you like it?
February 4, 2013
Aerotap 15-NC is a low-viscosity petroleum-based cutting oil specially compounded for light-to-medium duty applications, including tapping, drilling, threading, and shearing. Aerotap 15-NC is fortified with extreme […]
Do you like it?
February 4, 2013
Aerokut® 749 is a low-viscosity petroleum-based cutting oil specifically compounded for medium to heavy duty applications. Aerokut® 749 is fortified with chlorinated and sulfurized extreme pressure […]
Do you like it?
January 6, 2012
Hamikleer® 1975-RP is similar to Hamikleer® 1975 but with improved rust protection for ferrous materials.
Do you like it?
January 6, 2012
Hamikleer® 1975-XS is a synthetic coolant that provides improved hard water stability versus Hamikleer® 1975.
Do you like it?
January 6, 2012
Hamikleer® 1975 is a synthetic coolant for ferrous and non-ferrous materials. It is designed for light-to-medium duty machining and grinding applications. It provides a liquid residual […]
Do you like it?
January 6, 2012
Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.
Do you like it?
January 6, 2012
Kleerkut® 4900-HD has an enhanced, upweighted synthetic lubricant package, compared to Kleerkut 4900, for heavier duty applications. This product is chlorine-free.
Do you like it?
January 6, 2012
Kleerkut® 4900-HP is a lower oil version of 4900 designed for light-to-medium duty applications. This product has more reserve alkalinity to enhance pH stability and provide […]
Do you like it?
January 6, 2012
Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and […]
Do you like it?
December 27, 2010
Kleerkut® 4960 performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals and offers significantly upgraded lubrication properties for aluminum machining […]
Do you like it?
December 17, 2010
Kleerkut® 2900 is a lower oil, heavy duty semi-synthetic lubricant containing extreme pressure additives. It is free of substances subject to reporting requirements of SARA Title […]
Do you like it?
November 18, 2010
Kleerkut® 4900 is a high oil semi-synthetic that performs a wide variety of machining and grinding applications on both ferrous and non-ferrous materials. It provides excellent […]
Do you like it?
November 18, 2010
Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube […]
Do you like it?
November 18, 2010
Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, […]
Do you like it?
November 18, 2010
Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, […]
Do you like it?
November 18, 2010
Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus […]
Do you like it?