Kleerkut® 4900-EPL – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-EPL is a high oil semi-synthetic with chlorinated extreme pressure additives for machining the toughest alloys.

Kleerkut® 4900-HD – Heavy Duty Semi-Synthetic Coolant

Kleerkut® 4900-HD has an enhanced, upweighted synthetic lubricant package, compared to Kleerkut 4900, for heavier duty applications. This product is chlorine-free.

Kleerkut® 4900-HP – Medium Duty Coolant

Kleerkut® 4900-HP is a lower oil version of 4900 designed for light-to-medium duty applications. This product has more reserve alkalinity to enhance pH stability and provide superior emulsion stability.

Hamikut® 100-MG3 – Soluble Oil Coolant

Hamikut® 100-MG3 possesses all the machining capabilities of Hamikut 100 but it has exceptional hard water stability that makes it very effective for machining magnesium and its alloys.

Kleerkut® 4960 – Semi-Synthetic Coolant for Aluminum

Kleerkut® 4960 performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals and offers significantly upgraded lubrication properties for aluminum machining operations, as well as better heavy duty lubrication on steel.

Kleerkut® 4960 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming, easy to clean using filtration or centrifuge, and long lasting.

Kleerkut® 2900 – Low Oil Semi-Synthetic Coolant

Kleerkut® 2900 is a lower oil, heavy duty semi-synthetic lubricant containing extreme pressure additives. It is free of substances subject to reporting requirements of SARA Title III, Section 313. This product provides improved lubricity and excellent micro-finishes. It is low foaming, rejects tramp oils and is suitable for high pressure recirculation.

Kleerkut® 4900 – High-Oil Semi-Synthetic Coolant

Kleerkut® 4900 is a high oil semi-synthetic that performs a wide variety of machining and grinding applications on both ferrous and non-ferrous materials.  It provides excellent finishes, is extremely bio-resistant, splits out tramp oils and has superior rust protection.

Hamilube® 9200-VP – Cutting Oil

Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube containing an advanced additive package that is free of sulfur, chlorine, and pigmented compounds. It has excellent lubrication characteristics that compares very favorably to chlorinated and sulfurized lubes. While it is designed for use neat, as received, it can be cut back with mineral oil or solvents for lighter work. Removal of the residue from the metal can be performed with solvent degreasing, detergent, or alkaline cleaning.

Hamilube® 7709 – Cutting Oil

Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.

Hamilube® 7609 – Cutting Oil

Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing.