Immunol® 1228-2 – NDT Additive

Immunol® 1228-2 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. This version provides much lower surface tension to water than Immunol® 1228. Protection against flash rusting and short term indoor storage provided. Product improves the effect of ultrasonic waves from transducer. It improves the liquid media by eliminating air pockets more rapidly. (For systems with agitation or rapid re-circulation, use Immunol® 1228)

Immunol® 1392-J – Water Soluble Rust Preventive

Immunol® 1392-J is odorless and dissolves instantly in any kind of water (even the very hardest) to make a clear, thin solution. Immunol® 1392-J has a slightly alkaline pH of 9.0 and is a detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. Immunol® 1392-J protects cast iron and ferrous metals submerged in its solutions for months and forms invisible, quick drying, protective coatings on metal, which insure maximum “indoor” protection. Deposited coatings of Immunol® 1392-J are water soluble and, therefore, will not show to advantage in humidity cabinet tests, due to condensation and the ease of washing the product off with plain water. Immunol® 1392-J will not cloud in water and will not gum or decompose when circulated in water. Immunol® 1392-J has exceptional power of heat absorption and convection. Immunol® 1392-J is not recommended for use on aluminum, copper or brass.

Immunol® 791-J – Mild Cleaner and Rust Inhibitor

Immunol® 791-J is an ultrasonic test tank additive that will dissolve instantly in any kind of water to make a clear, thin solution. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals, but is not recommended for use on aluminum, copper or brass. Immunol® 791-J protects cast iron and ferrous metals submerged in its solution indefinitely and forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Immunol® 791-J will not cloud in solutions of water at temperatures up to 210 (F) and will not gum or decompose when circulated in water.

Hamikleer® 712 and 712-2 – Synthetic Couplants

Hamikleer® 712 and 712-2 are water soluble synthetic couplants for ultrasonic testing replacing glycerine. The buffering action of this Hamikleer® 712 series permits testing of many metals and metallic couples that typically corrode in aqueous-phase couplants. The low halogen content makes the Hamikleer® 712 series the ideal material to use on titanium and other space-age metals, where possible halogen stress corrosion could be a problem. The exceptional water solubility and solution clarity of the Hamikleer® 712 series allows easier rigging and positioning in submerged tank testing. There are several viscosity grades for this product, contact us for a version formulated to meet your specific needs.

Immunol® S-6-I – Aluminum Detergent Cleaner

Immunol® S-6-I can be used for all general cleaning and degreasing of ferrous and non-ferrous parts and equipment replacing flammable, toxic solvents and alkaline cleaners. Immunol® S-6-I emulsifies oils, mill soils and provides mild indoor rust protection in one operation. used in steel mills, metalworking plants, paper and textile mills as a “general purpose” solvent cleaner. widely used in tumbling and as a “bucket” solvent. Immunol® S-6-I is used as an additive for vibratory deburring or finishing and is inhibited for protection to aluminum.

Mill Purge® 1812 – Industrial Maintenance Cleaner

Mill Purge® 1812 is an industrial maintenance cleaner for floors, machinery, sumps, kettles and vats, etc. It is also used in ultrasonic cleaning, dip tank cleaning of steel, cast iron and aluminum parts and equipment.

Steelgard® 8200-H — Synthetic Rust Preventive

Steelgard® 8200-H is a synthetic rust preventive concentrate for the indoor storage protection of steel and copper coated steel. It produces a clear solution in water dilutions, so it can be utilized as a test tank additive for pressure testing of tubing.

Purgitol® RPV-1 – Detergent Immersion Cleaner

Purgitol® RPV-1 is a liquid metal cleaner concentrate for use in immersion tanks, ultrasonic cleaning, or rotary barrel cleaning systems. Its use is for removal of oily soils, such as machining, grinding, or drawing oil residues, synthetic coolants, rust preventives, lubricating oils, and rolling oils. It can be used on steel, cast and malleable iron, and non-ferrous metal surfaces.

Immunol® S-6-H – Detergent Immersion Cleaner

Immunol® S-6-H is a detergent type cleaner for soak tank cleaning and degreasing of ferrous and non-ferrous parts. It emulsifies oils such as drawing compounds and rust preventives, and removes mill soils and smut very effectively. It may also be used for general purpose cleaning as a “bucket” solvent to replace more flammable or toxic materials. If used on aluminum, extended immersion times (one hour or more) produce darkening. Use Immunol® S-6-I as an alternative for aluminum.

Immunol® 1809-J – Ultrasonic NDT Additive

Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications.