Hamiterge® 1930 – Solvent Cleaner for Ink and Glue

Hamiterge® 1930 is an extremely light colored, non-aqueous, transparent cleaning solvent used in many applications for removal of oils, greases, mill soils, adhesive residues, etc. as well as layout and marker lines. Hamiterge® 1930 can be used on all metals, as received, by dip, spray or wipe or cut with 1 part water. Hamiterge® 1930 will evaporate rapidly and completely leaving surfaces clean and dry.

Steelgard® X-267-B – Long-term Outdoor Storage Rust Prevention

Steelgard® X-267-B is a long term, outdoor rust preventive that can be used on ferrous or non-ferrous metals, in uncovered or covered storage conditions. It protects tools, stampings, forgings, castings, machinery, tubing or any metal parts that need a waxy, plastic, non-tacky film. It protects overseas and domestic shipments.

Steelgard® 8703-AT — Long Term Indoor Storage Protection

Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness.

Steelgard® 1505-TC — Indoor and Outdoor Rust Prevention

Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F.

Immunol® 1357-2-J – All-Purpose Detergent Cleaner

Immunol® 1357-2-J is a clear, medium body, green liquid. It is odorless, non-flammable and pH 7.0 neutral. It is used in paper manufacturing as calendar roll cleaner and felt conditioner. It is used as additive to soluble oil (or synthetic) systems to emulsify “tramp” or hydraulic oil, loosen sludge, settle heavy particles, lift “fines” or lighter bodies to the surface. This product prevents stains or rust on ground or polished work and prevents “smut” formation in rolling when added to the soluble rolling oil. It is also a successful and economical machine, floor and wall cleaner mixed with plain water at 2 to 6 ounces per gallon and applied by brush, mop, or rag.

Hamisonic® X-289 and X-290 – Ultrasonice NDT Fluid

Hamisonic® X-289 and X-290 are ultrasonic couplants for contact testing on horizontal or vertical surfaces. X-289 is a light viscosity material and X-290 is a heavier viscosity material. These materials can be brushed on the test surface and left on or removed with a water wash. It is a more economical set of couplants; dries to a film having minimal residue.

Hamisolve® 622 – Solvent Cleaner

Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry.

Hamico® 1003 – Lubricating Oil

Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be used in many applications where light lubrication is needed, e.g., forming, bending, stamping, straightening. It can be used on all metals as received, by pumping, dip, spray or wipe.

Hamico® 578-C

Hamico® 578-C is a liquid rust remover concentrate designed to dissolve rust on contact with steel or iron surfaces. The time required for rust removal is dependent on the degree of rust present. It removes light rust in a few minutes. Heavy rust will require longer times and may need repeated rinsing and application. It conforms to the general requirements of Mil Spec. M-10578-C, Type IV.

Steelgard® 9060 — Rust Prevention for Outdoor Storage

Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. It is a ready to use product straight from the container and dries to a dry, transparent film that will not re-emulsify when exposed to moisture in the air. Steelgard® 9060 will provide excellent protection to metals under indoor or covered outdoor conditions. This product is particularly helpful where the need to reduce VOC emission levels is critical.