Hamiterge® 2031-C2 – Alkaline Spray Cleaner

Hamiterge® 2031-C2 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, metallic chips and fines, oily soils, and shop or mill dirt from sheet steel surfaces and other ferrous metal parts. It is designed for usage in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperature conditions in dilutions with water. It is low foaming, completely biodegradable and free rinsing. It splits out cleaned soils readily and maintains low foaming characteristics when soils accumulate that can form soaps.

Hamiterge® 711-2 – Powdered Alkaline Cleaner

Hamiterge® 711-2 is an extremely high strength powdered alkaline cleaner consisting of exceptional wetting agents and detergents in a base of alkaline builders. It is an immersion cleaner designed for low or high temperature applications. It will remove rolling oils and other mill soils from all steel surfaces, including stainless and galvanized. It is also applicable for use in high speed scrubber systems. It is lower foaming at higher operating temperatures, (160 F and above) and is completely free rinsing with water. It is also available in a low foam version (Hamiterge® 711-2-LF) for spray washers.

Hamicote® EF-317 – Lime Bath Additive

Hamicote® EF-317 is an additive for lime or borax solutions to improve cohesive and adhesive properties and to disperse and suspend lime or borax more uniformly throughout the bath and on the rod while retarding rust and minimizing foam. Hamicote® EF-317 prevents powdering and dusting of dried lime and borax films and improves die life.

Hamikleen® 9002 – Sulfuric Acid Additive

Hamikleen® 9002 is a free-flowing granular additive for use in sulfuric acid pickling. This product produces a brighter, more uniformly pickled steel surface and provides excellent wetting properties to the bath.

Hamidraw® 497-MX-2 – Stamping Lubricant

Hamidraw® 497-MX-2 is composed of extreme pressure resisting chlorinated base and synthetic esters. Pigmented and non-flammable, this product is completely removable in mineral solvents, chlorinated solvents and hot alkaline cleaners. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils.

Hamidraw® 497-B – Stamping Lubricant

Hamidraw® 497-B is composed of extreme pressure resisting chlorinated base and synthetic esters. It contains no pigments, is non-flammable and is completely removable in mineral or chlorinated solvents. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils.

Atmoscleer® 8001 – Foam Blanket Additive

Atmoscleer® 8001 is a foam blanket additive for hydrochloric acid batch pickling baths. It imparts a densely packed, uniform layer of foam on the surface of a steel pickling bath. Some agitation may be required to generate the foam layer when there is not enough pickling action occurring, such as when the bath temperature is very low (below 1000F). It is extremely stable in hydrochloric acid baths containing high amounts of dissolved iron and under high temperature conditions. It cuts down on heat loss and holds corrosive hydrochloric fumes in the bath. It should be used in conjunction with Activol® acid inhibitors for hydrochloric acids, such as Activol® 1803, Activol® 1590-C, Activol® 1590–CP or Activol® 1903 for best results in batch pickling operations.

Atmoscleer® 1785 – Fume Suppressant

Atmoscleer® 1785 is a foam blanket and fume suppressant for sulphuric acid pickle baths. Small amounts produce a heavy foam which cuts fumes and saves energy. This product may also be used for phosphoric acid baths.